Starrett Calibration Services

Starrett Calibration

Micro Precision Calibration Laboratory provides the complete, fully accredited services for all calibration needs.

Our extensive calibration services can be custom-tailored to meet your specific requirements -- either at your site or through our Pick-Up &Starrett; Return service. If you have a calibration need for an instrument that is not listed in this area, please contact us.

Micro Precision Calibration capabilities include:

STARRETT 123EMZ-24 50538 - No.123, 123M, 123EM Series , Master Vernier Calipers, 24"/600mm, .001"/0.02mm Grad, in Finished Wood Case
STARRETT 3812 - Ultrasonic Thickness Gage
STARRETT 123Z-36 50530 - No.123, 123M, 123EM Series , Master Vernier Calipers, 36", .001" Grad in Finished Wood Case
STARRETT C416R-48 51511 - No. C416 Series , Steel Rules with Inch Graduations - Heavy Spring-Tempered, 48", 16R Grad
STARRETT ST436EXRLZ 52030 - No. 436 Series , Outside Micrometer SETS with Standards in Case, SET, 0-12", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut
STARRETT 724LZ-30 52996 - No. 724,724M Series , Tubular Bow Type Micrometers with Interchangeable Anvils and Standards, 24-30" Range, .001" Grad, with Lock Nut, in Case
STARRETT 776D 68762 - Series No. 776 , Check Gages and Accessories, Display, 140-ST, 4 input-Starrett LVDT
STARRETT 25-881J 53307 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, 25mm Range, Dial Reading 0-100, 0.01mm Grad
STARRETT 673XZ 67191 - No. 673X, 673MX Series , Direct-Reading Bench Micrometers, Head: 0-2" Range, .0001" Grad with Case, Carbide Face
STARRETT 781XTZ-625 68167 - No. 781XT Series , AccuBore(tm) Electronic Bore Gage, Extended Travel - 3 Point Contact, Pistol Grip, 1/2-5/8" (12.5-16mm) Range
STARRETT 781XTZ-500 68166 - No. 781XT Series , AccuBore(tm) Electronic Bore Gage, Extended Travel - 3 Point Contact, Pistol Grip, 3/8-1/2" (10-12.5mm) Range
STARRETT 3814 67754 - Nos. 3814, 3816, 3817 , Hardness Testers, Bench, Analog
STARRETT 81-241J 53428 - No. 81 Series , 1 11/16" Dial Indicators, .250" Range, Dial Reading 0-100, .001" Grad
STARRETT 2600-0 65593 - No. 2600 Series , Electronic Digital Indicators, Basic Model, .0005" (0.01mm) Resolution without Output
STARRETT S436DRLZ 51919 - No. 436 Series , Outside Micrometer SETS with Standards in Case, SET, 6-12", .001" Grad, Ratchet Stop, Lock Nut
STARRETT 448Z-612 52310 - No. 448, 448ME Series , Vernier Depth Gages, 0-12" Range, .001" Grad, (2) 6"/12" Blades, in Case
STARRETT 128MAZ 64378 - No.128, 128M Series , Inside Micrometer SETS, 150-1950mm, 0.01mm Grad with Finished Case
STARRETT 799A-6/150 - Electronic Caliper w/o output, 0-6" (0-150mm) in case
STARRETT 124DZ 50554 - No.124, 124M Series , Solid-Rod Inside Micrometers, 2-32" Range, .001" Grad, 124A/124C Rods with Case
STARRETT 799A-12/300 - Electronic Caliper w/o output, 0-12" (0-300mm) in case
STARRETT 780XTZ-750 12026 - No 780XT Series , Electronic Digital Internal Micrometers, Extended Travel and SETS (with Output), Setting Rings, Interchangeable Contacts, IP65 Compliant, 5/8-3/4" (16-20mm) Range, 3-Point Carbide Contact
STARRETT 657AA 52743 - MAGNETIC BASE- INDICATOR HOLDER
STARRETT 717 67001 - No. 717 , Gaging Amplifier, Gaging Amplifier with Power Supply
STARRETT 2740-3 65825 - No. 2700 Series , Wisdom(tm) BASIC Series Electronic Digital Indicators, .0005" (0.01mm) Resolution, 2" (50mm) Range
STARRETT 1010EZ - DIAL INDICATOR POCKET GAGE 0-.375" Range, .0005" Grad, 0-50 Dial, Flat Contacts
STARRETT 2720-1 65816 - No. 2700 Series , Wisdom(tm) BASIC Series Electronic Digital Indicators, .0001" (0.002mm) Resolution, .600" (15mm) Range
STARRETT 25-881J-8 64658 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, 25-881J with 8mm Stem, 0.01mm Grad
STARRETT 120AM-150 66295 - No.120, 120M Series , Dial Calipers, 150mm, Yellow Dial, Fitted Plastic Case
STARRETT 715-1Z 64479 - No. 715 Series , Electronic Gage Amplifier and Accessories, Lever Type Gaging Head
STARRETT 120A-6 64514 - No.120, 120M Series , Dial Calipers, 6", White Dial, Fitted Plastic Case
STARRETT 255Z-18 51231 - No. 255, 255M, 255EM Series , Vernier Height Gages, 0-18" Range, .001" Grad with Case
STARRETT 216RL-5 63470 - No. 216, 216M Series , Digital Micrometers, 5", .001" Grad, Ratchet Stop, Lock Nut
STARRETT ST436.1CXRLZ 68045 - No. 436 Series , Outside Micrometer SETS with Standards in Case, SET, 0-6", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut
STARRETT 656-12041J 53809 - INDICATOR 3-5/8 FACE, 12" RANGE
STARRETT 2730-0 65819 - No. 2700 Series , Wisdom(tm) BASIC Series Electronic Digital Indicators, .00005" (0.001mm) Resolution, 1" (25mm) Range
STARRETT F2730-3 65841 - No. 2700 Series , Wisdom(tm) PLUS Series Electronic Digital Indicators, .0005" (0.01mm) Resolution, 1" (25mm) Range
STARRETT 764MEAXFL 66446 - No. 764, 764M Series , Electronic Digital Sheet Metal Micrometers, 150mm Throat Depth, 0-25mm (0-1") Range, Round Anvil, with Output, Carbide Faces
STARRETT 776-1Z 68817 - Series No. 776 , Check Gages and Accessories, +/-.010" (0.25mm) Lever Type Probe
STARRETT C359FZ W/SLC 66929 - No. C359 Series , Precision Universal Bevel Vernier Protractors with Fine Adjustment, 7"/12" Blades, 5 min. or 1/12° in Case w/Standard Letter of Certification
STARRETT G-81697 81697 - TWO-FACE GRANITE PARALLELS - GRADE A - INSPECTION, 12 in. x 1 in. x 2 in.
STARRETT 3752-24/600 - 0-24" Electronic Height Gage
STARRETT S436.1CRLZ 68043 - No. 436 Series , Outside Micrometer SETS with Standards in Case, SET, 0-6", .001" Grad, Ratchet Stop, Lock Nut
STARRETT 124A 50540 - No.124, 124M Series , Solid-Rod Inside Micrometers, 2-8" Range, .001" Grad, 6 Measuring Rods
STARRETT S905AZ 65805 - No. S903, S906, S908-S909 Series - Tool SETS, Select Precision Measuring Tool SET (Inch), in Case
STARRETT 715-2Z 64480 - No. 715 Series , Electronic Gage Amplifier and Accessories, Cartridge-Type Gaging Head
STARRETT S917Z 53102 - No. S917Z , Automotive Tool SET with Case, Automotive Service Tool SET, with Case
STARRETT 790AFL-1 64048 - No. 790, 790M , Electronic Digital Multi-Anvil Micrometers (with Output), 0-1" (0-25mm) Range, without Case
STARRETT 657TW 52761 - No. 657 Series , Test Indicators and Holders, Magnetic Base with Post Assembly/Fine-Adjustment Attachment
STARRETT 799A-8/200 - Electronic Caliper w/o output, 0-8" (0-200mm) in case
STARRETT C434-12-4R 51548 - No. 434 Series , Combination Sets with Forged and Hardened Steel Square and Center Heads, Cast Iron Protractor Heads, Reversible, 12", 4R Grad, Satin Chrome Blade
STARRETT 25-2041J 53309 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, 2.000" Range, Dial Reading 0-100, .001" Grad
STARRETT 1015MA 56131 - No. 1015,1015M Series , Portable Dial Thickness Gages, 10mm Range, 0-100 Dial, 0.01mm Grad, without Case
STARRETT 796XFL-1 - 0-1" IP67 Electronic Micrometer
STARRETT LH520-100 63320 - TAPE LINE
STARRETT 2740-1 65824 - No. 2700 Series , Wisdom(tm) BASIC Series Electronic Digital Indicators, .0001" (0.002mm) Resolution, 2" (50mm) Range
STARRETT 659A 56687 - No. 659, 659M Series , Heavy-Duty Magnetic Base Indicator Holders, Magnetic Base with 659G/659H/659J/18318
STARRETT 84Z-111-4J 56264 - Nos.84, 84M Series , Dial Bore Gages with Cases, 1 1/2"-3" Range .0001" Grad
STARRETT 53295 25-441J - DIAL INDICATOR AGD 2
STARRETT 715-7 64187 - No. 715 Series , Electronic Gage Amplifier and Accessories, +/- .020" Probe
STARRETT 823DZ 53055 - No. 823,823M Series , Tubular Inside Micrometers, 4-32" Range with 8 Rods, with Case
STARRETT 788XFL 66449 - No. 788, 788M , Electronic Digital Micrometers with Rounded Anvil (with Output), 0-1" (0-25mm) Range, Carbide Anvil & Spindle, without Case
STARRETT 718 65164 - No. 718 Series , Analog Amplifier, Analog Amplifier
STARRETT S668DZ 67153 - No. 668 Series , Shaft Alignment Clamps, Shaft Alignment Clamp W/81-141J and Extension
STARRETT 224GRLZ 50776 - No. 224, 224M Series , Interchangeable Anvil Micrometers with Ratchet Stop, Lock Nut, Anvils, Standards in Case, 6-12", .001" Grad
STARRETT C604R-48 52683 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 48", 4R Grad
STARRETT C404R-48 51486 - No. C404 Series , Steel Rules with Inch Graduations, Heavy Spring-Tempered, 48", 4R Grad
STARRETT 749BZ-12RL 68854 - No. 749, 749M Series , Electronic Digital Micrometer Depth Gage, 0-12" (0-300mm) Range with Case
STARRETT 823AZ 53050 - No. 823,823M Series , Tubular Inside Micrometers, 1 1/2-8" Range with 5 Rods/Handle, with Case
STARRETT 199Z W/SLC 66932 - No. 199Z Series , Master Precision Level, Master Precision Level, 15" (380mm) w/Standard Letter of Certification
STARRETT S668CZ 67152 - No. 668 Series , Shaft Alignment Clamps, Shaft Alignment Clamp W/196B5 and Extension
STARRETT 3752-12/300 - 0-12" Electronic Height Gage
STARRETT 196A6Z 50701 - No. 196, 196M Series , Universal Back-Plunger Dial Test Indicators, 0-100 Antimagnetic with 3 Contact Points, 4 Attachments in Case
STARRETT 3805A 12265 - No. 3805A, Digital Durometer, Digital Durometer
STARRETT S436.1BXRLZ 68040 - No. 436 Series , Outside Micrometer SETS with Standards in Case, SET, 0-4", .001" Grad, Carbide Faces, Ratchet Stop, Lock Nut
STARRETT 762MEXFL-25 66077 - No. 762, 762M Series , Electronic Digital Micrometer Heads with Rotating or Non-Rotating Spindles (with Output), 0-25mm (0-1") Range, Friction Thimble, Lock Nut, Carbide Face
STARRETT 762XFL 65058 - No. 762, 762M Series , Electronic Digital Micrometer Heads with Rotating or Non-Rotating Spindles (with Output), 0-1" (0-25mm) Range, Friction Thimble, Lock Nut, Carbide Face
STARRETT CH416R-72 51523 - No. C416 Series , Steel Rules with Inch Graduations - Heavy Spring-Tempered, 72", 16R Grad with Hook
STARRETT 799AZ-24/600 11978 - No. 799 Series, Electronic Calipers, Electronic Caliper, 0-24" (0-600mm), w/o Output, w/Plastic Case
STARRETT 414-6 51503 - No. 414 Series , Steel General Utility Rules, 72", 8ths/16ths Grad, Both Sides
STARRETT 120Z-12 56693 - No.120, 120M Series , Dial Calipers, 12", White Dial, Finished Wood Case
STARRETT 1010Z - DIAL INDICATOR POCKET GAGE 0-.375" Range, .001" Grad, 0-100 Dial, Flat Contacts
STARRETT G-85028 85028 - 18" X 24" X 4" BLACK GRANITE SURFACE PLATE, GRADE "AA", NO LEDGE,.000065" TIR
STARRETT C635-1800MM 64299 - No. 635,C635 Series , Steel Rules with Millimeter Graduations, 150-1000mm, Spring-Tempered, 1800mm, No. 35 Grad
STARRETT 660 68621 - No. 660, Magnetic Base with Post Assembly, Mini-Mag Base
STARRETT 830D 53079 - No. 829, 830, 831 Series , Small Hole Gages and SETS, .300-.400" (7.6-10.2mm) Range, 2" (50mm) Length
STARRETT 78XTZ-750 68133 - No. 78, 78M Series , Inside Micrometers, Extended Travel with Setting Rings and Cases, 5/8-3/4" Range, w/3 Point Carbide Contact
STARRETT 226RL-5 50835 - No. 226, 226M Series , Outside Micrometers and SETS, 5", .001" Grad, Ratchet Stop, Lock Nut
STARRETT ST226AXRLZ 56448 - No. 226, 226M Series , Outside Micrometers and SETS, SET, (3) 0-3", .0001" Grad, Carbide Faces, with Standards in Case
STARRETT 656-6041J 53803 - No. 656 Series , 3 5/8" Dial Indicators, 6.000" Range, Dial Reading 0-100, .001" Grad
STARRETT C416R-72 51513 - 72" 16R GRAD,HEAVY SPRING-TEMP- PERED RULE
STARRETT 797B-8/200 W/SLC 68824 - No. 797B Series , IP65 Compliant Electronic Calipers, 0-8" (0-200mm), with Output, in Fitted Plastic Case, w/Standard Letter of Certification
STARRETT 50699 196B1 - DIAL INDICATOR,BACK PLUNGER
STARRETT 578 64960 - No. 578 Series , V-Blocks and Clamps, V-Block and Clamp
STARRETT 124D 50552 - No.124, 124M Series , Solid-Rod Inside Micrometers, 2-32" Range, .001" Grad, 124A/124C Rods
STARRETT 208MZ 64338 - No. 207, 207M, 208, 208M Series , Stainless Steel Can Seam Micrometers, 0-9.5mm Range, 0.01mm Grad, without Depth Gage in Case
STARRETT S226ARLZ 50854 - No. 226, 226M Series , Outside Micrometers and SETS, SET, (3) 0-3", .001" Grad with Standards in Case
STARRETT 706BZ 57122 - No. 706,706M Series , Inspection Blocks, Matched Pair
STARRETT 224CRLZ 50778 - No. 224, 224M Series , Interchangeable Anvil Micrometers with Ratchet Stop, Lock Nut, Anvils, Standards in Case, 9-12", .001" Grad
STARRETT 764AXFL 66445 - No. 764, 764M Series , Electronic Digital Sheet Metal Micrometers, 6" Throat Depth, 0-1" (0-25mm) Range, Round Anvil, with Output, Carbide Faces
STARRETT S668BZ 67151 - No. 668 Series , Shaft Alignment Clamps, Shaft Alignment Clamp W/Extension Plates and Posts
STARRETT 790MEAFL-25 66071 - No. 790, 790M , Electronic Digital Multi-Anvil Micrometers (with Output), 0-25mm (0-1") Range, without Case
STARRETT T230XFL W/SLC - Micrometer 0-1" Range, .0001" Grad, Carbide Faces, Friction Thimble, Lock Nut, Standard Letter of Certification
STARRETT 799A-6/150 W/SLC - Electronic Caliper w/ SLC, 0-6" (0-150mm) in case
STARRETT 657D 52749 - No. 657 Series , Test Indicators and Holders, Magnetic Base with 657G/657H/657J
STARRETT 653 55917 - No. 653, 653M Series , Dial Comparator Stands, Comparator with Cast Iron Base, without Indicator
STARRETT - No. 1202 Series , Dial Calipers, 12", in Fitted Case
STARRETT 733XFLZ-8 64247 - No. 733, 733M Series , Electronic Digital Micrometers (with Output) with Carbide-Faced Anvil and Spindle, Friction Thimble and Lock Nut, 7-8" Range, .0001" Resolution, with Case
STARRETT 709BZ 64215 - No. 708, 708M, 709, 709M Series , Dial Test Indicators with Dovetail Mounts with Case, White Dial, .060" Range, .0005" Grad, without Attachments
STARRETT S4010-832 67490 - Nos. 4000 Series , Pin Gage Sets with Case, Sizes .751-.832+
STARRETT 436XRLZ-15 51873 - No. 436 Series , Outside Micrometers, 13-24" Range, 14-15", .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case
STARRETT 245 51170 - No. 245, 245M , Engineers' Taper, Wire, Thickness Gage, Inch Reading
STARRETT C359DZ 51396 - No. C359 Series , Precision Universal Bevel Vernier Protractors with Fine Adjustment, 12" Blade, 5 min. or 1/12° in Case
STARRETT 769AXFL 66447 - No. 769, 769M , Electronic Digital Tube Outside Micrometers, 0-1" (0-25mm) Range with Output, Carbide Spindle
STARRETT 2720-4 65818 - No. 2700 Series , Wisdom(tm) BASIC Series Electronic Digital Indicators, .001" (0.02mm) Resolution, .600" (15mm) Range
STARRETT 1212XRL 53178 - No. 1212,1212M Series , Stainless Steel Micrometers with Ratchet Stop, Lock Nut, Standard, 1-2" Range, .001" Grad, Carbide Faces
STARRETT S555Z-7 - SET of (7) Jewelers' Screwdrivers: Nos. 555AA/A/B/C/D/E/F with Case
STARRETT 82224 - 18" x 24" Surface Plate Stand
STARRETT 263L-38TN 67111 - No. 263, 263M Series , Micrometer Heads, 0-1" Range, 3/8" Threaded Hub and Check Nut, .001" Grad, Lock Nut
STARRETT 797B-6/150 W/SLC 68823 - No. 797B Series , IP65 Compliant Electronic Calipers, 0-6" (0-150mm), with Output, in Fitted Plastic Case, w/Standard Letter of Certification
STARRETT 25-611J 53301 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, .200" Range, Dial Reading 0-10, .0001" Grad
STARRETT S830FZ 53081 - No. 829, 830, 831 Series , Small Hole Gages and SETS, SET of 5: One each of Nos. 830A/B/C/D/E, in Case
STARRETT 445DZ-12RL 67119 - No. 445,445M Series , Micrometer Depth Gages, 0-12" Range, 6" Base, 12 Rods, Ratchet Stop, Lock Nut, Case
STARRETT S7793Z - Contact & Non-Contact Digital Tachometer
STARRETT T436.1XFL-4 W/SLC 68022 - No. 436 Series , Outside Micrometers, 3-4" Range, .0001" Grad, Friction Thimble, Lock Nut, Carbide Faces w/Standard Letter of Certification
STARRETT 435-18-4R 51558 - COMBINATION SQUARE SET FORGED
STARRETT 760FL 64051 - No. 760, 760M , Electronic Digital Screw Thread Comparator Micrometer, 0-1" (0.25mm) Range, Friction Thimble, Lock Nut, without Case
STARRETT 734XFL-1 64253 - No. 734, 734M Series , Electronic Digital Micrometer (no Output) with Carbide-Faced Anvil and Spindle, FrictionThimble and Lock Nut, 0-1" Range, .00005" Resolution, without Case
STARRETT 1X-5 1/2 50004 - No. 1 Series , Cut Nippers, Adjustable Jaw, 5 1/2" with Carbide Tipped Jaws
STARRETT 445BZ-12RL 67118 - No. 445,445M Series , Micrometer Depth Gages, 0-12" Range, 4" Base, 12 Rods, Ratchet Stop, Lock Nut, Case
STARRETT T1230XRL 53197 - No. 1230,1230M Series , Stainless Steel Micrometers, 0-1" Range, .0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces
STARRETT 797B-12/300 W/SLC 68825 - No. 797B Series , IP65 Compliant Electronic Calipers, 0-12" (0-300mm), with Output, in Fitted Plastic Case, w/Standard Letter of Certification
STARRETT S579HZ 52617 - TELESCOPING GAGE, SET OF 6: 579A/B/C/D/E/F
STARRETT 37-24 50252 - No.36, 37 Series , Lock-Joint Transfer Type Calipers with Fine-Adjustment, 24"/600mm (Inside)
STARRETT 81-111-624J 53380 - No. 81 Series , 1 11/16" Dial Indicators, .025" Range, Dial Reading +0.10 -0.10, .0001" Grad
STARRETT G-80634 80634 - CRYSTAL PINK - GRADE B - TOOLROOM - NO LEDGE, Flatness 0.0003in. (0.0076mm) , Wt 165 lbs.18 in. x 24 in. x 4 in.
STARRETT 386-72 51467 - No. 386 Series , Draftsmen's Steel Straight Edges with Beveled Edge, Not Graduated, 72" (1800mm)
STARRETT 771 67434 - No. 771 , SPC IV Excel Software, SPC IV Excel Software
STARRETT C33HC-18-16R 56403 - Nos.33H and HC Series , Combination Squares with Forged and Hardened Steel Heads and with Smooth Black Enamel Finish, 18", 16R Grad with Center Head, Satin Chrome Blade
STARRETT 439-24 52111 - No. 439 Series , Builder's Combination Tool, 24"
STARRETT 435-12-16R 51557 - COMBINATION SETS WITH CAST IRON HEADS, 12", 16R GRAD
STARRETT 124MC 50549 - No.124, 124M Series , Solid-Rod Inside Micrometers, 200-800mm, 0.01mm Grad, 4 Measuring Rods
STARRETT C34-5ME12 65760 - TRU-LOK(r) TAPES WITH 3/4" (19mm) BLADES, 5M/ 16' S12 Grad Style with Chrome Case
STARRETT C636-1000 52637 - No. C636 Series , Steel Rules with Millimeter and Inch Graduations, Spring-Tempered, 1000mm (39 1/4"), No. 36 Grad
STARRETT 53054 - No. 823,823M Series , Tubular Inside Micrometers, 4-24" Range
STARRETT 446MAZ-150RL 56295 - No. 446, 446M Series , Digital Micrometer Depth Gages, 0-150mm Range, 0.01mm Grad, 6 Rods, Ratchet Stop, Lock Nut, Case
STARRETT 25-441J WCSC 56807 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, 1.000" Range, Dial Reading 0-100, .001" Grad, w/case stem cap for level control
STARRETT 446AZ-6RL 56289 - DIGITAL DEPTH MICROMETER
STARRETT 657EZ 52751 - No. 657 Series , Test Indicators and Holders, Magnetic Base with 657G/657H/657J/25-131J with Case
STARRETT 206 55794 - No. 206 , Outside Micrometer Stand, Outside Micrometer Stand
STARRETT S766AZ 12206 - No. 766, 766M Series , Basic Electronic Tool SETS, SET (with Output): 799A-6/150 / 734XFL-1 in Case
STARRETT 82C8 66034 - No.82 Series , Individual Probes with Actuating Rods, C Series, 1.310-1.440" (33.3-36.6mm) Range
STARRETT 811-1PZ 57082 - No. 811,811M Series , Dial Test Indicators with Swivel Head, .060" Range, 0-30-0 White Dial, .001" Grad, without Attachments
STARRETT 687-3Z 63700 - No. 687, 687M Series , Countersink Gages, 82°, .360-.560" Range with Case
STARRETT C316R-36 51378 - No. C316R Series , Steel Rules, 36", 16R Grad, Full-Flexible
STARRETT 68661 - No. 797B Series , IP65 Compliant Electronic Calipers
STARRETT S909Z 65122 - No. S903, S906, S908-S909 Series - Tool SETS, Basic Precision Measuring Tool SET (Inch), in Case
STARRETT 657MCZ 56356 - No. 657 Series , Test Indicators and Holders, Base/Post Assembly with 196MB1/PT18718/Points/Adapter, Case
STARRETT 25-441J W/SLC 66863 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, 1.000" Range, Dial Reading 0-100, .001" Grad, w/Standard Letter of Certification
STARRETT 1015B 53121 - No. 1015,1015M Series , Portable Dial Thickness Gages, 1" Range, 0-100 Dial, .001" Grad, without Case
STARRETT 733XFL-1 W/SLC 66905 - No. 733, 733M Series , Electronic Digital Micrometers (with Output) with Carbide-Faced Anvil and Spindle, Friction Thimble and Lock Nut, 0-1" Range, .00005" Resolution, without Case w/Standard Letter of Certification
STARRETT 684-3Z 63690 - No. 684, 684M Series , Internal Chamfer Gages, 90-127°, 0-1" Range
STARRETT 25-3041J 53310 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, 3.000" Range, Dial Reading 0-100, .001" Grad
STARRETT 700B 52911 - No. 700,700M Series , Inside Caliper Gages, 1-2" Range, .001" Grad, Friction Thimble, Lock Screw
STARRETT C636-500 52636 - No. C636 Series , Steel Rules with Millimeter and Inch Graduations, Spring-Tempered, 500mm (19 1/2"), No. 36 Grad
STARRETT 490-18-4R 52512 - No. 490, 491 Series - Bevel Protractors, 18", 4R Grad, Reversible, Black Smooth
STARRETT 823BZ 53052 - No. 823,823M Series , Tubular Inside Micrometers, 1 1/2-12" Range with 8 Rods/Handle, with Case
STARRETT 450-6 56766 - No. 450,450M Series , Dial Depth Gages, 0-6" Range, .001" Grad
STARRETT C434-24-4R 51552 - No. 434 Series , Combination Sets with Forged and Hardened Steel Square and Center Heads, Cast Iron Protractor Heads, Reversible, 24", 4R Grad, Satin Chrome Blade
STARRETT 640RJZ 52709 - No. 640,640M Series , Dial Depth Gages, 0-1/2" Range, .0005" Grad, 0-50 Dial, in Case
STARRETT 700A 52909 - No. 700,700M Series , Inside Caliper Gages, .200-1.200" Range, .001" Grad, Friction Thimble, Lock
STARRETT 98Z-12 W/SLC 66933 - No.98 Series , Machinists' Levels, Ground/Graduated Vials, 12" (300mm), Ground Single Plumb/Cross Test Vials in Case w/Standard Letter of Certification
STARRETT 170Z - Dial Sheet Gage 0-2.5mm Range, 0.02mm Grad, 0-250 Dial Reading
STARRETT C434-12-4RW/SLC 66898 - No. 434 Series , Combination Sets with Forged and Hardened Steel Square and Center Heads, Cast Iron Protractor Heads, Reversible, 12", 4R Grad, Satin Chrome Blade w/Standard Letter of Certification
STARRETT 795XRL-1 69085 - No. 795 Series, IP67 Electronic Digital Micrometer (with Output), 0-1" (0-25mm) Range, With Ratchet Stop, With Carbide Faces, With RS232 Output Port
STARRETT 795XFL-1 - 0-1" IP67 Electronic Micrometer with Output
STARRETT 92287 - 4.000'' Rectangular Gage Block, Grade 0
STARRETT 656-611J 53795 - No. 656 Series , 3 5/8" Dial Indicators, .200" Range, Dial Reading 0-10, .0001" Grad
STARRETT 683-3Z 63686 - No. 683, 683M Series , Internal Chamfer Gages, 0-90°, 0-1" Range
STARRETT 733XFL-1 64239 - No. 733, 733M Series , Electronic Digital Micrometers (with Output) with Carbide-Faced Anvil and Spindle, Friction Thimble and Lock Nut, 0-1" Range, .00005" Resolution, without Case
STARRETT 676-1 56647 - No. 676 Series , Magnetic Indicator Backs, Magnetic Back for No. 81 Series
STARRETT 650B5 64476 - No. 650, 650M Series , Back-Plunger Dial Test Indicators with Deep Hole Attachment, 0-50-0 Dial, Contact Points (3)
STARRETT 20-1 1/2 50128 - PRECISION SQUARE 20-1.5 20-1 1/2
STARRETT 567 52588 - No. 566, 568 Series - V-Blocks and Clamps, V-Block and Clamp, Complete Set
STARRETT SRB-3 - Set of 3 Blocks (1ea: RBR-30, RBC-63, RBB-94)
STARRETT 1X-7 50005 - No. 1 Series , Cut Nippers, Adjustable Jaw, 7" with Carbide Tipped Jaws
STARRETT 55-6 50283 - No.55 Series , Master Precision Squares, Beveled Edges, 6" (150mm) Blade, 4 5/16" (110mm) Beam
STARRETT S668A 67150 - No. 668 Series , Shaft Alignment Clamps, Shaft Alignment Clamp W/Extension Plates and Posts
STARRETT C306R-6 51352 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 6", 6R Grad, Full-Flexible
STARRETT T436XRL-7 51702 - No. 436 Series , Outside Micrometers, 6-7" Range, .0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces
STARRETT 92939 - 9 Piece Rectangular Steel Gage Block Set
STARRETT 53240 25-141J - DIAL INDICATOR AGD 2
STARRETT 25-109J 53222 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, .015" Range, Dial Reading 0-3-0, .00005" Grad
STARRETT 98Z-12 50444 - No.98 Series , Machinists' Levels, Ground/Graduated Vials, 12" (300mm), Ground Single Plumb/Cross Test Vials in Case
STARRETT 65781 - TAPE MEASURE METRIC 4m C12-4M8
STARRETT C305R-6 51347 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch
STARRETT 434M-300 56255 - No. 434 Series , Combination Sets with Forged and Hardened Steel Square and Center Heads, Cast Iron Protractor Heads, Reversible, 300mm, mm and 1/2mm Both Sides
STARRETT 443Z-6RL 52173 - No. 443 Series , Micrometer Depth Gages with Half Base, 0-6" Range, .001" Grad, 6 Rods, Ratchet Stop, Lock Nut, Case
STARRETT 799A-8/200 W/SLC - Electronic Caliper w/ SLC, 0-8" (0-200mm) in case
STARRETT 196B5 50717 - No. 196, 196M Series , Universal Back-Plunger Dial Test Indicators, 0-50-0 with 3 Contact Points and Adapter only
STARRETT C636-1000 W/SLC 66892 - No. C636 Series , Steel Rules with Millimeter and Inch Graduations, Spring-Tempered, 1000mm (39 1/4"), No. 36 Grad w/Standard Letter of Certification
STARRETT C334-500 56697 - No. C330, C331, C334, C335S Series , Steel Rules with Millimeter and Millimeter/Inch Graduations, 500mm (19 1/2"), No. 34 Grad, Full-Flexible
STARRETT 81-245J 53436 - No. 81 Series , 1 11/16" Dial Indicators, .125" Range, Dial Reading 0-50, .001" Grad
STARRETT 436XRL-7 51698 - No. 436 Series , Outside Micrometers, 6-7" Range, .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces
STARRETT 434-12-4R 51542 - No. 434 Series , Combination Sets with Forged and Hardened Steel Square and Center Heads, Cast Iron Protractor Heads, Reversible, 12", 4R Grad
STARRETT 281 51316 - No. 279, 281, 283-284, 286-287 Series - Fixed Gage Standards, American Standard Wire Gage, Nos. 0-36 (.325-.005") Range
STARRETT 283 51318 - No. 279, 281, 283-284, 286-287 Series - Fixed Gage Standards, U.S. Standard Gage, Nos. 0-36 (.3125-.007") Range
STARRETT 92-9 50426 - No.92 Series , Carpenters' Dividers, 9" (225mm)
STARRETT 185 50675 - No. 185 , Tap and Drill Gage, "Time Saver" Tap and Drill Gage
STARRETT 436RL-7 51684 - No. 436 Series , Outside Micrometers, 6-7" Range, .001" Grad, Ratchet Stop, Lock Nut
STARRETT 55-4 1/2 50281 - No.55 Series , Master Precision Squares, Beveled Edges, 4 1/2" (115mm) Blade, 3 1/2" (90mm) Beam
STARRETT T1463RL 53209 - No. 1463, 1463M Series , Stainless Steel Micrometer Heads, 0-1/2" Range, .0001" Grad, Ratchet Stop, Lock Nut
STARRETT G-80616 80616 - CRYSTAL PINK - GRADE B - TOOLROOM - NO LEDGE, Flatness 0.0002in. (0.005mm) , Wt 83 lbs.12 in. x 18 in. x 4 in.
STARRETT SACLO-100 64407 - REEL-FAST(r) CHALK AND PLUMB LINES, 30M/ 100' with Neon Orange Case
STARRETT T-36 36136 - ALUMINUM T-SQUARES, 36", .081" thick, 1/8" & 1/16" Grads
STARRETT 436.1XRL-6 68030 - No. 436 Series , Outside Micrometers, 5-6" Range, .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces
STARRETT 64214 - No. 708, 708M, 709, 709M Series , Dial Test Indicator
STARRETT G-85016 85016 - 12" X 18" X 3" BLACK GRANITE SURFACE PLATE, GRADE "B", NO LEDGE, .0002" TIR.
STARRETT 657T 52760 - No. 657 Series , Test Indicators and Holders, Magnetic Base with Post Assembly
STARRETT C607R-24 52691 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 24", 7R Grad
STARRETT S154LZ 50586 - No.154 Series , Adjustable Parallels and SETS, SET of 6 Parallels, Sizes A/B/C/D/E/F in Case
STARRETT 36-24 50248 - No.36, 37 Series , Lock-Joint Transfer Type Calipers with Fine-Adjustment, 24"/600mm (Outside)
STARRETT 797B-6/150 68659 - No. 797B Series , IP65 Compliant Electronic Calipers, 0-6" (0-150mm), with Output, in Fitted Plastic Case
STARRETT 457C 52429 - No. 457 Series , Diemakers' Square with Angular Adjustment, Complete, with Straight and Offset Blades
STARRETT 711LCSZ 52957 - No. 711 Series , Last Word(r) Test Indicators with Cases, Compact Dial Indicators, .0005" Grad, .030" Range, Indicator Complete with All Attachments
STARRETT 120A-6 W/SLC 66568 - No.120, 120M Series , Dial Calipers, 6", White Dial, Fitted Plastic Case w/Standard Letter of Certification
STARRETT 216XRL-1 55955 - No. 216, 216M Series , Digital Micrometers, 1", .001" Grad, Carbide Faces, Ratchet Stop, Lock Nut
STARRETT 50697 196A1Z - DIAL INDICATOR, BACK PLUNGER
STARRETT C310K-6 56701 - 6' RULE,CHROME,FLEXIBLE,W/CLIP
STARRETT CT1-25 65896 - CODE TAPE(r), 25' with Yelllow Case
STARRETT 18C 56757 - No.18 Series , Automatic Center Punch, Adjustable Stroke, 5 1/4" (130mm) Length, 11/16" (17mm) Diameter, Heavy Duty
STARRETT 443Z-3RL 52171 - No. 443 Series , Micrometer Depth Gages with Half Base, 0-3" Range, .001" Grad, 3 Rods, Ratchet Stop, Lock Nut, Case
STARRETT M-1.01 93221 - M1, ALL-PURPOSE LUBRICANT, M1, 1 gallon containers, Carton of 4
STARRETT S191 50687 - No. 191 Series , "Little Giant" Jack Screws and SET, 1 1/2-2 1/4" (38-57mm) Range, SET Complete with all Attachments
STARRETT 125MEA-12/300 61886 - No.125 Series, Vernier Caliper, Metric/English , 300mm/12" Range, .02mm/.001" Grad
STARRETT 657P 52757 - No. 657 Series , Test Indicators and Holders, Magnetic Base
STARRETT C435M-300 61918 - No. 435, 435ME Series , Combination Sets with Cast Iron Heads, 300mm, mm and 1/2mm Both Sides, Satin Chrome Blade
STARRETT 505A-7 11677 - PROTRACTOR, ALUMINUM - 7"
STARRETT T216XFL-1 55960 - No. 216, 216M Series , Digital Micrometers, 1", .0001" Grad, Carbide Faces, Friction Thimble, Lock Nut
STARRETT S579HZ - Telescoping Gauge Set, Nos. 579A/B/C/D/E/F in Case
STARRETT 80-144J WFB 56808 - No. 80 Series , Miniature 1 1/4" Dial Indicators, .100" Range, Dial Reading 0-20-0, .001" Grad, with Flat Back
STARRETT 440Z-3RL 52115 - No. 440,440M Series , Micrometer Depth Gages, 0-3"
STARRETT 270 51292 - No. 269, 269M, 270 Series , Taper Gages, .010-150" Range, .001" Grad (0.3-4mm Range, 0.05mm Grad)
STARRETT RS6.000.A1 - 6.000'' Rectangular Steel Gage Block, Grade 0
STARRETT 928 - Wood Case for 12" Gage
STARRETT 66979 - No. 1202 Series , Dial Calipers, 8", in Fitted Case
STARRETT S167CHZ W/SLC 66876 - No.S167 Series , Radius Gages SETS - Inch, SET, Combines Set Nos. S167AH/S167B with 110 Holder w/Standard Letter of Certification
STARRETT CH416R-24 51519 - No. C416 Series , Steel Rules with Inch Graduations - Heavy Spring-Tempered, 24", 16R Grad with Hook
STARRETT 435M-300 66177 - No. 435, 435ME Series , Combination Sets with Cast Iron Heads, 300mm, mm and 1/2mm Both Sides
STARRETT PLMY-9 12171 - LEVEL, TORPEDO 9"
STARRETT 505A-12 67752 - PROTRACTOR, ALUMINUM - 12"
STARRETT T230XRL W/SLC - Micrometer 0-1" Range, .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut, Standard Letter of Certification
STARRETT 50256 - CALIPER
STARRETT 237M 51081 - No. 237, 237M , Rule Depth Gages, 0-150mm Range, mm/1/2mm
STARRETT 20-4 1/2 50132 - No.20 Series , Master Precision Squares, 4 1/2" (115mm) Blade, 3 1/2" (90mm) Beam
STARRETT C607R-36 56436 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 36", 7R Grad
STARRETT RC1.000.AA - 1.000'' Rectangular Croblox Gage Block, Grade 00
STARRETT 491-24-4R 52523 - No. 490, 491 Series - Bevel Protractors, 24", 4R Grad, Reversible, Black Wrinkle
STARRETT 162D 50602 - No.162 Series , Pin Vises and SETS, .115-.187" (2.9-4.8mm) Range
STARRETT SD167GZ 63433 - No.SD167 Series , Radius Gage SETS - Decimal/Inch, SET, Decimal/inch, 26 Gages without 110 Holder
STARRETT AMSE-1000 36098 - FLAT ALUMINUM STRAIGHT EDGE RULES, 1000 mm, .125" (3.175 mm) thick
STARRETT 226RL-1 12209 - MICROMETER, OUTSIDE 1"
STARRETT 29B 50201 - No.29 , Scratch Gage, (150mm), 64ths Grad
STARRETT 436.1XRL-3 68011 - No. 436 Series , Outside Micrometers, 2-3" Range, .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces
STARRETT 436.1XRL-5 68024 - No. 436 Series , Outside Micrometers, 4-5" Range, .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces
STARRETT CH604R-36 52677 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 36", 4R Grad with Hook
STARRETT C604R-24 52681 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 24", 4R Grad
STARRETT 135A 50570 - No.135 Series , Pocket Levels, Satin Nickel-Plated Finish
STARRETT C635-1000 52633 - No. 635,C635 Series , Steel Rules with Millimeter Graduations, 150-1000mm, Spring-Tempered, 1000mm, No. 35 Grad
STARRETT 289C 51324 - No. 289, 298, 299 Series , Attachment for Combination Squares, Height and Depth Gage Set: Clamp Block, Scriber, Rule, Rod
STARRETT C12-12-4R W/SLC 66931 - No.12 Series , Bevel Protractors, Non-Reversible, 12", 4R Grad, Satin Chrome Blade w/Standard Letter of Certification
STARRETT 196B1 W/SLC 66865 - No. 196, 196M Series , Universal Back-Plunger Dial Test Indicators, 0-100 with 3 Contact Points and Adapter only w/Standard Letter of Certification
STARRETT 187 50677 - No. 187 , Jobbers' Drill Gage, 1/16-1/2"
STARRETT C251C 51209 - No. 251 Series , Steel Beam Trammels and Attachments, Trammel, 18" (450mm) Dividing Range
STARRETT T232RL 50955 - No. 232, 232M Series , Outside Micrometers, 0-1/2", .0001" Grad, Ratchet Stop, Lock Nut
STARRETT 257A 51240 - No. 257 Series , Full-Sized Surface Gages, 9" Spindle
STARRETT 569AXP 66437 - No. 569, 569M Series , Tube Micrometers, 0-1" Range, .001" Grad, 3/16" min. hole size, Plain, Carbide Spindle
STARRETT 655-441J 53613 - No. 655 Series , 2 3/4" Dial Indicators, 1.000" Range, Dial Reading 0-100, .001" Grad
STARRETT 82C3 66029 - No.82 Series , Individual Probes with Actuating Rods, C Series, .685-.815" (17.4-20.7mm) Range
STARRETT 491-18-4R 52522 - No. 490, 491 Series - Bevel Protractors, 18", 4R Grad, Reversible, Black Wrinkle
STARRETT 263L 51253 - No. 263, 263M Series , Micrometer Heads, 0-1" Range, .001" Grad, Lock Nut
STARRETT 162B 50600 - No.162 Series , Pin Vises and SETS, .030-.062" (0.8-1.6mm) Range
STARRETT 196B6 50702 - BACK-PLUNGER TEST INDICATOR 0-100 ANTIMAGNETIC
STARRETT G-83011 83011 - 48" X 96" VINYL SURFACE PLATE COVER
STARRETT C604R-36 52682 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 36", 4R Grad
STARRETT 467 52464 - Nos. 467, 467M , Thickness Gages with Straight Leaves, Thickness Gage, .0015-.200" Range, 13 Leaves
STARRETT C11H-24-16R 56376 - Nos.11H, 11HC Series , Combination Squares with Cast Iron Heads and Black Wrinkle Finish, 24", 16R Grad, Satin Chrome Blade
STARRETT C11MH-600 56384 - Nos.11H, 11HC Series , Combination Squares with Cast Iron Heads and Black Wrinkle Finish, 600mm, Satin Chrome Blade
STARRETT 711FSAZ 52925 - No. 711 Series , Last Word(r) Test Indicators with Cases, Compact Dial Indicators, .001" Grad, .030" Range, Indicator with Univ. Shank, Body Clamp, Long/Short Arm
STARRETT 657A 52744 - No. 657 Series , Test Indicators and Holders, Magnetic Base with Swivel Post Assembly
STARRETT 25W 53916 - No.25 Series , AGD Indicator Accessories and SET, Roller Contact Point
STARRETT 240A 51136 - No. 240 Series , Pin Vises with Tapered Collets and SET, .010-.055" (0.25-1.4mm) Range
STARRETT S167CHZ 50619 - No.S167 Series , Radius Gages SETS - Inch, SET, Combines Set Nos. S167AH/S167B with 110 Holder
STARRETT T230XRL 50944 - No. 230, 230M Series , Outside Micrometers, 0-1" Range, .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut
STARRETT V230MXRL - Micrometer 0-25mm Range, 0.001mm Grad, Carbide Faces, Ratchet Stop, Lock Nut
STARRETT V230MXFL - Micrometer 0-25mm Range, 0.001mm Grad, Carbide Faces, Friction Thimble, Lock Nut
STARRETT T230XRL - Micrometer 0-1" Range, .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut
STARRETT S565WB - Drive Pin Punch SET of (8): 565A/B/C/D/E/F/G/H in Vinyl Case
STARRETT 551B 67196 - No. 551 Series , Precision Screwdrivers and Set, .080" (2.0mm) Blade Width
STARRETT 25-141JN/S 53330 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, .250" Range, Dial Reading 0-50-0, .001" Grad, Nonshock
STARRETT 530JT-50 65953 - MEASURING TAPES - 530 SERIES, 50' L5-100 Grad Style
STARRETT 85B 50399 - No.85 Series , Extension Dividers with Caliper Legs, 9" (225mm) with Divider Legs only
STARRETT C306R-12 51353 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 12", 6R Grad, Full-Flexible
STARRETT 211XP 66428 - No. 211XP , Rounded Anvil Outside Micrometer, 0-1" Range, .001" Grad, Carbide Anvil & Spindle
STARRETT 711MFSZ 52930 - No. 711M Series , Last Word(r) Test Indicators with Cases, Compact Dial Indicators, 0.01mm Grad, 0.7mm Range, Indicator with Body Clamp
STARRETT C11H-24-4R 56374 - Nos.11H, 11HC Series , Combination Squares with Cast Iron Heads and Black Wrinkle Finish, 24", 4R Grad, Satin Chrome Blade
STARRETT 536-300 66552 - 536 SERIES MEASURING TAPES, NYLON CLAD STEEL WITH HOOK, 300'
STARRETT PT61768 - Interface Adapter for Starrett Tools to PC
STARRETT S4000-060 67480 - Nos. 4000 Series , Pin Gage Sets with Case, Sizes .011-.060+
STARRETT 436.1XRL-2 68003 - No. 436 Series , Outside Micrometers, 1-2" Range, .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces
STARRETT AY34-16 65926 - AUTOMATIC CONTROLOK(r) TAPES WITH 3/4" (19mm) BLADES, 16' S1 Grad Style with Yellow Case
STARRETT 159M 50591 - No.155, 156M, 159M Series , Screw Pitch Gages, 60° Threads, 22 Leaves, 1-11.5mm TPI
STARRETT 85E 50402 - No.85 Series , Extension Dividers with Caliper Legs, 12" (300mm) with Divider Legs only
STARRETT 711HSZ 52953 - No. 711 Series , Last Word(r) Test Indicators with Cases, Compact Dial Indicators, .0005" Grad, .030" Range, Indicator with Body Clamp
STARRETT 132-9 50563 - No.132 Series , Precision Bench Levels, 9" (225mm) with Main Vial and Double Plumb Vial
STARRETT 286 51320 - No. 279, 281, 283-284, 286-287 Series - Fixed Gage Standards, Drill and Steel Wire Gage, Nos. 61-80
STARRETT 298 51327 - No. 289, 298, 299 Series , Attachment for Combination Squares, Key Seat Clamps (Pair)
STARRETT 1202-6 66964 - No. 1202 Series , Dial Calipers, 6", in Fitted Case
STARRETT S667A 63274 - No. 667,667M Series , Thickness Gage or "Feeler Stock" and ASSORTMENTS, ASSORTMENT, one each, 32 different sizes
STARRETT 385-24 51457 - No. 385 Series , Steel Straight Edges, Beveled One Edge, Not Graduated, 24" (600mm)
STARRETT 98-8 50442 - No.98 Series , Machinists' Levels, Ground/Graduated Vials, 8" (200mm) with Cross Test Vial
STARRETT 82B6 66024 - No.82 Series , Individual Probes with Actuating Rods, B Series, .467-.532" (11.9-13.5mm) Range
STARRETT C404R-24 51484 - No. C404 Series , Steel Rules with Inch Graduations, Heavy Spring-Tempered, 24", 4R Grad
STARRETT 190A 50681 - No. 190 Series , "Little Giant" Jack Screws and SETS, 2 1/4-3 3/8" (57-85mm) Range, Jack only
STARRETT 230P - Mircrometer 0-1" Range, .001 Grad.
STARRETT PMW-3 68835 - Pro-Site(r) MEASURING WHEELS, 3' Circumference Wheel
STARRETT S154SZ 50584 - No.154 Series , Adjustable Parallels and SETS, SET of 4 Parallels, Sizes A/B/C/D in Case
STARRETT 25-131J 53232 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, .125" Range, Dial Reading 0-25-0, .0005" Grad
STARRETT 82B4 66022 - No.82 Series , Individual Probes with Actuating Rods, B Series, .342-.405" (8.7-10.3mm) Range
STARRETT S167MCZ 55820 - No.S167M Series , Radius Gage SETS - Millimeter, SET, Combines Set Nos. S167MA/S167MB without Holder
STARRETT 25-341/5J 53285 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, .500" Range, Dial Reading 0-50-0, .001" Grad
STARRETT 25-441P 53296 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, 1.000" Range, Dial Reading 0-100, .001" Grad, Plain Bearings
STARRETT 25-341J 53287 - No. 25 Series , 2 1/4" Dial Indicators, Jeweled, 1.000" Range, Dial Reading 0-50-0, .001" Grad
STARRETT C305R-18 51349 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 18", 5R Grad, Full-Flexible
STARRETT 36-12 50246 - No.36, 37 Series , Lock-Joint Transfer Type Calipers with Fine-Adjustment, 12"/300mm (Outside)
STARRETT S829EZ 53074 - No. 829, 830, 831 Series , Small Hole Gages and SETS, SET of 4: One each of 829A/B/C/D, in Case
STARRETT 491-12-4R 52521 - No. 490, 491 Series - Bevel Protractors, 12", 4R Grad, Reversible, Black Wrinkle
STARRETT RC.600.AA - .600'' Rectangular Croblox Gage Block, Grade 00
STARRETT C604R-24 W/SLC 66887 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 24", 4R Grad, w/Standard Letter of Certification
STARRETT C33MH-300 56412 - Nos.33H and HC Series , Combination Squares with Forged and Hardened Steel Heads and with Smooth Black Enamel Finish, 300mm, Metric, Satin Chrome Blade
STARRETT G-81824 81824 - CLEANER, Plastic quarts (Case of 12)
STARRETT H823C/D/E 53060 - No. 823,823M Series , Tubular Inside Micrometers, 1" Micrometer Head for 823C, 823D, 823E
STARRETT 33JHC-6-4R 50230 - No.33J Series , Junior Combination Squares, Heads, and Blades, 6", 4R Grad with Center Head
STARRETT 289A 51322 - No. 289, 298, 299 Series , Attachment for Combination Squares, Blade: 1" (25mm) Range, 1 9/16" (40mm) Length
STARRETT 269MA 56031 - No. 269, 269M, 270 Series , Taper Gages, 2-12mm Range, 64mm Length, 10 Leaves
STARRETT 1604R-6 53210 - No. 1604 Series , Stainless Steel Rules, 6" Rule, 4R Grad, Stainless Steel
STARRETT C11H-18-4R 56370 - Nos.11H, 11HC Series , Combination Squares with Cast Iron Heads and Black Wrinkle Finish, 18", 4R Grad, Satin Chrome Blade
STARRETT S423Z 51524 - No. 423 Series , Special Steel Rule, SET, and Accessories, SET, 5 Rules with Holder in Case
STARRETT 436.1RL-1 67993 - No. 436 Series , Outside Micrometers, 0-1" Range, .001" Grad, Ratchet Stop, Lock Nut
STARRETT 380-24 W/SLC 66895 - No. 380 Series , Steel Straight Edges, Not Beveled, Not Graduated, 24" (600mm) w/Standard Letter of Certification
STARRETT 555F - Jewelers' Screwdriver Phillips Blade #0
STARRETT XY1-5ME 67779 - ProSite(r) TAPE MEASURES, 5M/16' S12 Grand with Yellow Case
STARRETT AY1-25 65925 - AUTOMATIC CONTROLOK(r) TAPES WITH 1" (25MM) BLADES, 25' S1 Grad Style with Yellow Case
STARRETT 1732 64435 - No. 1716 to 1734 Series , VHS Video Tapes, "Precision Tools" (combines Nos.1716/1719/1725/1728/1731)
STARRETT 1463RL 53207 - No. 1463, 1463M Series , Stainless Steel Micrometer Heads, 0-1/2" Range, .001" Grad, Ratchet Stop, Lock Nut
STARRETT C183 W/SLC 66930 - No. C182,C183 Series , Steel Protractors, 6" (0-180°) with Rectangular Head w/Standard Letter of Certification
STARRETT 161E 50598 - No.161 Series , Toolmakers' Parallel Clamps (Pairs), 3 1/2" (89mm) Capacity, 2 1/4" (57mm) Throat Depth
STARRETT 186 50676 - No. 186 , Drill and Steel Wire Gage, Nos. 1-60
STARRETT 156M 50589 - No.155, 156M, 159M Series , Screw Pitch Gages, 60° Threads, 28 Leaves, 0.25-2.50mm TPI
STARRETT 154A 50578 - No.154 Series , Adjustable Parallels and SETS, 1 3/4" (45mm) Length, 3/8-1/2" (9.5-12.7mm) Range
STARRETT 267 51286 - No. 267 , Taper Gage, 1/16-1 1/16" Range
STARRETT 98-6 50441 - MACHINIST LEVEL
STARRETT 62 50304 - No.62 , Rule Holder, Rule Holder
STARRETT C604R-18 W/SLC 66886 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 18", 4R Grad, w/Standard Letter of Certification
STARRETT 1604R-12 53211 - No. 1604 Series , Stainless Steel Rules, 12" Rule, 4R Grad, Stainless Steel
STARRETT C11MH-300 56382 - Nos.11H, 11HC Series , Combination Squares with Cast Iron Heads and Black Wrinkle Finish, 300mm, Satin Chrome Blade
STARRETT 164C 63657 - No.164 Series , "A" Clamps, 4" (100mm) Jaw Opening, 2 3/4" (70mm) Throat Depth
STARRETT 25R 50153 - No.25 Series , AGD Indicator Accessories and SET, Contact Point SET
STARRETT SF190 64622 - No. 190 Series , "Little Giant" Jack Screws and SETS, 2 1/4-3 3/8" (57-85mm) Range, SET Complete with Fine-Adjusting Screw and Attachments
STARRETT 55974 - No.66 Series , Thickness Gages, Metric, 20 Straight Leaves
STARRETT CP505A-12 12256 - PROTRACTOR, ALUMINUM COMBINATION - 12"
STARRETT G-81822 81822 - CLEANER, (4) 1 Gallon containers (Case)
STARRETT PY12-4ME12 12175 - 1/2" (13mm) PUSH-PULL POCKET TAPES, 4M/ 12' S12 Grad Style with Yellow Case
STARRETT S551Z-7 67203 - No. 551 Series , Precision Screwdrivers and Set, Set of 7 Screwdrivers W/Case
STARRETT 166A 50609 - No.166 Series , Pin Vises and SETS, with PVC Octagonal Handles, 0-.040" (0-1mm) Range
STARRETT C303SR-24 51338 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 24", 3R Grad, Semi-Flexible
STARRETT BB-48 36016 - *BRASS BOUND MAHOGANY LEVELS (PROFESSIONAL, BB SERIES), 48" (120 cm), 6 Vials (4 plumb, 2 level)
STARRETT 11HC-12-4R 50056 - Nos.11H, 11HC Series , Combination Squares with Cast Iron Heads and Black Wrinkle Finish, 12", 4R Grad with Center Head, Regular Blade
STARRETT 198 50718 - No. 198 , Letter Size Drill Gage, Standard Letter Size
STARRETT C622R-6 56660 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 6", 10R Grad with Decimal Equivalents
STARRETT S240Z 51140 - No. 240 Series , Pin Vises with Tapered Collets and SET, SET, (4) Sizes, Nos. 240A/B/C/D in Vinyl Case
STARRETT 91C 50421 - No.91 Series , Tap Wrenches, 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size
STARRETT 37-6 50249 - No.36, 37 Series , Lock-Joint Transfer Type Calipers with Fine-Adjustment, 6"/150mm (Inside)
STARRETT 70A 50323 - No.70 Series , Pocket Scribers, Scriber with 2 3/8" (60mm) Long Point
STARRETT 579F-12 63200 - No. 579 Series , Telescoping Gages and SETS, Self-Centering with Two Telescoping Arms, 3 1/2-6" (89-150mm) Range, 12" (300mm) Handle
STARRETT CB33J-4R 67100 - No.33J Series , Junior Combination Squares, Heads, and Blades, 6", 4R Grad, Satin Chrome
STARRETT 13ME 56263 - No.13, 13M Series , Double Squares with Hardened Blades, 150mm with Graduated and Bevel Blades
STARRETT 98-4 50440 - MACHINIST LEVEL
STARRETT PT26151 - Center Distance Attachment for Caliper
STARRETT 277-6 51311 - No. 274, 275, 277 Series , Toolmakers' Spring-Type Calipers and Dividers with Round Legs and Solid Nut, 6" (150mm) Divider
STARRETT 384H 51452 - No. 384 Series , Steel Parallels and SETS, 6" (150mm) Length, Pair: 3/8" (10mm) Thick, 3/4" (19mm) Width
STARRETT CH604R-24 52676 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 24", 4R Grad with Hook
STARRETT C305R-24 51350 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 24", 5R Grad, Full-Flexible
STARRETT 26-18 50190 - Nos.26, 27 Series , Improved Firm-Joint Calipers, 18" (450mm), Outside
STARRETT 77B-6 50360 - No.74, 75, 77 Series , "Fay" Spring-Type Calipers, 6" (150mm) Divider with Quick-Spring Nut
STARRETT 279 51314 - No. 279, 281, 283-284, 286-287 Series - Fixed Gage Standards, Fillet or Radius Gage, .020-.400" Range, 20 Leaves
STARRETT C310T-6 56700 - RULE,CHROME,FLEXIBLE,TAPERED 6"
STARRETT Y1-10ME12 66379 - TRU-LOK(r) TAPES WITH 1" (25mm) BLADES, 10M/ 33' S12 Grad Style with Yellow Case
STARRETT 166D 50612 - No.166 Series , Pin Vises and SETS, with PVC Octagonal Handles, .115-.187" (2.9-4.8mm) Range
STARRETT 25MSB 56007 - No.25 Series , AGD Indicator Accessories and SET, Split Bushing, 12.7mm Length, 8mm ID, 9.5mm OD
STARRETT 666-1 52796 - No. 666, 666M Series , Thickness Gage or "Feeler Stock" in Rolls, .001", 25' Roll, Dispenser Case
STARRETT S167DZ 50620 - No.S167 Series , Radius Gages SETS - Inch, SET, 1/32-1/2" by 32nds, 16 Gages without 110 Holder
STARRETT 33H-12-4R 50209 - Nos.33H and HC Series , Combination Squares with Forged and Hardened Steel Heads and with Smooth Black Enamel Finish, 12", 4R Grad, Regular Blade
STARRETT 453A 52345 - No. 453,453M Series , Diemakers' Squares, 2 1/2" with Standard Graduated Blade
STARRETT 579E-12 63199 - No. 579 Series , Telescoping Gages and SETS, Self-Centering with Two Telescoping Arms, 2 1/8- 3 1/2" (54-89mm) Range, 12" (300mm) Handle
STARRETT RC.100.AA - .100'' Rectangular Croblox Gage Block, Grade 00
STARRETT RC.150.AA - .150'' Rectangular Croblox Gage Block, Grade 00
STARRETT RC.250.AA - .250'' Rectangular Croblox Gage Block, Grade 00
STARRETT 39-6 50257 - No.38, 39 Series , Lock-Joint Calipers with Fine-Adjustment, 6"/150mm (Inside)
STARRETT 50254 - Caliper
STARRETT 274-6 51303 - No. 274, 275, 277 Series , Toolmakers' Spring-Type Calipers and Dividers with Round Legs and Solid Nut, 6" (150mm), Inside Caliper
STARRETT C305R-12 W/SLC 66881 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 12", 5R Grad, Full-Flexible w/Standard Letter of Certification
STARRETT C330-300 W/SLC 66883 - No. C330, C331, C334, C335S Series , Steel Rules with Millimeter and Millimeter/Inch Graduations, 300mm (11 3/4"), No. 30 Grad, Full-Flexible w/Standard Letter of Certification
STARRETT 56392 - Combination Squares with square head 6", 4R Grad, Satin Chrome
STARRETT C305R-12 51348 - RULE, CHROME, FLEXIBLE 12"
STARRETT 50092 - Blades Only for Combination Squares, Sets and Bevel Protractors
STARRETT 579E-8 67115 - No. 579 Series , Telescoping Gages and SETS, Self-Centering with Two Telescoping Arms, 2 1/8-3 1/2" (54-89mm) Range, 8" (200mm) Handle
STARRETT C389-12 51473 - No. C389 Series , Steel Rules with Shrink Graduations, 12", 5/32" Shrink Per Foot, 4R Grad
STARRETT 676-2 56648 - No. 676 Series , Magnetic Indicator Backs, Magnetic Back for Nos. 25, 2600 Series
STARRETT 272MA 51297 - No. 272,272M Series , Fillet or Radius Gages, 18 Leaves, 0.75-5mm Range by 0.25mm
STARRETT RS3.000A1 - 3" Gage Block, Steel Grade O
STARRETT 92286 - 3.000'' Rectangular Gage Block, Grade 0
STARRETT RC.120.AA - .120'' Rectangular Croblox Gage Block, Grade 00
STARRETT 50361 - No.74, 75, 77 Series , "Fay" Spring-Type Calipers, 6
STARRETT BB-24 36014 - *BRASS BOUND MAHOGANY LEVELS (PROFESSIONAL, BB SERIES), 24" (60 cm), 6 Vials (4 plumb, 2 level)
STARRETT PT62103 - Shielded Cable to 761/772 Series Modules
STARRETT 579D-12 63198 - No. 579 Series , Telescoping Gages and SETS, Self-Centering with Two Telescoping Arms, 1 1/4-2 1/8" (32-54mm) Range, 12" (300mm) Handle
STARRETT 460B 64446 - No. 460,460M Series , Micrometer Heads, 0-1/2" Range, .001" Grad, Plain
STARRETT 75B-6 50354 - No.74, 75, 77 Series , "Fay" Spring-Type Calipers, 6" (150mm) with Quick-Spring Nut (Outside)
STARRETT C604R-12 W/SLC 66885 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 12", 4R Grad, w/Standard Letter of Certification
STARRETT 579C-12 63197 - No. 579 Series , Telescoping Gages and SETS, Self-Centering with Two Telescoping Arms, 3/4-1 1/4" (19-32mm) Range, 12" (300mm) Handle
STARRETT RS.010A1 - .010" Gage Block, Steel Grade O
STARRETT RS.015A1 - .015" Gage Block, Steel Grade O
STARRETT 74B-6 50348 - No.74, 75, 77 Series , "Fay" Spring-Type Calipers, 6" (150mm) with Quick-Spring Nut (Inside)
STARRETT 380-24 51440 - No. 380 Series , Steel Straight Edges, Not Beveled, Not Graduated, 24" (600mm)
STARRETT 92268 - ,500'' Rectangular Gage Block, Grade 0
STARRETT 236HB 51076 - No. 236 Series , Combination Steel Rule Depth/Angle Gages, 6" Combination Gage with Hook Rule and Rod, 32nds/64ths
STARRETT 14A 50117 - No.14, 14M Series , Double Steel Squares with Hardened and Ground Head and Blades, 2 1/2" with Graduated Blade
STARRETT C316R-18 51376 - No. C316R Series , Steel Rules, 18", 16R Grad, Full-Flexible
STARRETT 50107 - Square Heads, Center Heads and Protractor Heads Only for combination squares, combination sets and bevel protractors
STARRETT 50355 - No.74, 75, 77 Series , "Fay" Spring-Type Calipers, 6"
STARRETT 92150 - .05'' Rectangular Gage Block (long length), Grade 0
STARRETT 460A 64444 - No. 460,460M Series , Micrometer Heads, 0-1/4" Range, .001" Grad, Plain
STARRETT 274-3 51301 - No. 274, 275, 277 Series , Toolmakers' Spring-Type Calipers and Dividers with Round Legs and Solid Nut, 3" (75mm), Inside Caliper
STARRETT C635-500 52632 - No. 635,C635 Series , Steel Rules with Millimeter Graduations, 150-1000mm, Spring-Tempered, 500mm, No. 35 Grad
STARRETT 414-3 51501 - No. 414 Series , Steel General Utility Rules, 36", 8ths/16ths Grad, Both Sides
STARRETT C183 50672 - No. C182,C183 Series , Steel Protractors, 6" (0-180°) with Rectangular Head
STARRETT 13B 50110 - No.13, 13M Series , Double Squares with Hardened Blades, 4" with Graduated and Bevel Blades
STARRETT C606R-12 52653 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 12", 6R Grad
STARRETT C493B 52534 - No. 493 Series , Protractor and Depth Gages, 0-180°, 6", Rectangular Head
STARRETT 50349 - No.74, 75, 77 Series , "Fay" Spring-Type Calipers, 6"
STARRETT 18A 50120 - AUTOMATIC CENTER PUNCH
STARRETT 6 50035 - No.6 , Screw Pitch Gage, 60° Threads, 30 Leaves, 4-42 TPI
STARRETT 579B-8 63193 - No. 579 Series , Telescoping Gages and SETS, Self-Centering with Two Telescoping Arms, 1/2-3/4" (13-19mm) Range, 8" (200mm) Handle
STARRETT 240C 51138 - No. 240 Series , Pin Vises with Tapered Collets and SET, .045-.135" (1.2-3.4mm) Range
STARRETT S555-7 52565 - No. 555 Series , Jewelers' Screwdrivers and SETS, SET of 7: Nos. 555AA/A/B/C/D/E/F
STARRETT 111 50476 - No.111 , Stair Gage Fixture Attachments, for Rafter and Framing Squares (Pair) - long
STARRETT 380-18 51439 - No. 380 Series , Steel Straight Edges, Not Beveled, Not Graduated, 18" (450mm)
STARRETT S162Z 50604 - No.162 Series , Pin Vises and SETS, Pin Vise SET, Sizes 162A/B/C/D in Protective Vinyl Case
STARRETT 474 52486 - No. 472, 476 Series - Screw Pitch Gages, 60° Threads, 28 Leaves, 4-80 TPI
STARRETT PT61120 - 3 Volt Battery No. CR2450
STARRETT 472 52484 - No. 472, 476 Series - Screw Pitch Gages, 60° Threads, 51 Leaves, 4-84 TPI
STARRETT 59A 50297 - No.59 Series , Trammel Heads, Divider Points, Attachments, Trammel Heads (2), 2 Points (6"/150mm)
STARRETT 83B-12 50385 - No.83 Series , Dividers, 12" (300mm) with Quick-Spring Nut
STARRETT 470 52482 - No. 470 , Stair Gage Fixture Attachments, for Rafter and Framing Squares (Pair) - short
STARRETT 234A-15 - 15'' End Measuring Rod
STARRETT RS2.000A1 - 2" Gage Block, Steel Grade O
STARRETT 92285 - 2.000'' Rectangular Gage Block, Grade 0
STARRETT H33-1224 50225 - Heads for Combination Squares, Combination Sets, and Bevel Protractors , 12", 18" or 24" Square Head
STARRETT 51348 W/SLC - Precision Rule, Chrome, Flexible, 12'' w/ Standand Letter of Certification
STARRETT C305R-6 W/SLC 66880 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 6", 5R Grad, Full-Flexible w/Standard Letter of Certification
STARRETT 289B 51323 - No. 289, 298, 299 Series , Attachment for Combination Squares, Blade: 1" (25mm) Range, 2 3/8" (60mm) Length
STARRETT 1620 53216 - No. 1620 , Tool and Instrument Oil, Tool and Instrument Oil for mechanics, homeowners, sportsmen
STARRETT 91B 50420 - No.91 Series , Tap Wrenches, 9" (225mm) Length, 3/16-1/2" (4.7-12.7mm) Tap Size
STARRETT PT22429 - Dovetail Body Clamp
STARRETT 13MA 56278 - No.13, 13M Series , Double Squares with Hardened Blades, 100mm with Graduated Blade
STARRETT G-83004 83004 - 18" X 24" VINYL SURFACE PLATE COVER
STARRETT 193 50696 - No. 193 , Steel Protractor, 0-180°
STARRETT S555-6 52563 - No. 555 Series , Jewelers' Screwdrivers and SETS, SET of 6: Nos. 555AA/A/B/C/D/E
STARRETT S264WB 51285 - No. 264 Series , Center Punches and SET, with Square Shank, SET, 7, Nos. 264A/B/C/D/E/F/G in Round Wood Box
STARRETT 177C 50662 - No. 177 Series , Steel Plumb Bobs, 8 1/2 oz. (240g), without Mercury
STARRETT 66B 57097 - No.66 Series , Thickness Gages, 31 Straight Leaves, 1/2 x 3 1/32", .0015-.035" Range
STARRETT 385-12 51455 - No. 385 Series , Steel Straight Edges, Beveled One Edge, Not Graduated, 12" (300mm)
STARRETT 191A 50688 - No. 191 Series , "Little Giant" Jack Screws and SET, 1 1/2-2 1/4" (38-57mm) Range, Jack only
STARRETT 26-12 50189 - Nos.26, 27 Series , Improved Firm-Joint Calipers, 12" (300mm), Outside
STARRETT RS.020A1 - .020" Gage Block, Steel Grade O
STARRETT RS.030A1 - .030" Gage Block, Steel Grade O
STARRETT 140-3-1800 67430 - EXPERT LEVELS, 72" (180 cm), 4 Vials (2 plumb, 2 level)
STARRETT G-83008 83008 - 36" X 48" VINYL SURFACE PLATE COVER
STARRETT 10H-6-4R 64942 - No.10 Series , Student Combination Squares, 6" Square, 4R Grad
STARRETT RS.025A1 - .025'' Rectangular Steel Gage Block, Grade 0
STARRETT 950 - Finished Wood Case for 0-8" Calipers
STARRETT 268A 51287 - No. 268 Series , V-Blocks and Clamps, V-Blocks (Pair), 1 1/8" (28mm) Capacity
STARRETT 665G-5/16 52794 - No. 665, 665M Series , Inspection Holder, AGD Dial Indicators, and SETS, Clamp with 5/16" Post
STARRETT 167M-2 1/2 55799 - No.167M Series , Individual Radius Gages Specifications - Millimeters, 2.5mm Radius Gage
STARRETT 167M-3 55800 - No.167M Series , Individual Radius Gages Specifications - Millimeters, 3mm Radius Gage
STARRETT 167M-3 1/2 55801 - No.167M Series , Individual Radius Gages Specifications - Millimeters, 3.5mm Radius Gage
STARRETT 117D 50486 - No.117 Series , Center Punches and SET, with Round Shanks, 4" (100mm) Length, 5/32" (4mm) Point Diameter
STARRETT 66 50314 - No.66 Series , Thickness Gages, 26 Straight Leaves, 1/2 x 3 1/32", .0015-.025" Range
STARRETT S190 50680 - No. 190 Series , "Little Giant" Jack Screws and SETS, 2 1/4-3 3/8" (57-85mm) Range, SET Complete with all Attachments
STARRETT 50314 66 - Fixed Gage Standards 26 Straight Leaves, 1/2" x 3 1/32", .0015-.025" Range
STARRETT Y34-16 65938 - TRU-LOK(r) TAPES WITH 3/4" (19mm) BLADES, 16' S1 Grad Style with Yellow Case
STARRETT CH604R-6 52673 - RULE,CHROME,FLEXIBLE W/HOOK 6"
STARRETT C251D 51211 - No. 251 Series , Steel Beam Trammels and Attachments, Coupling with extra 20" (600mm) Beam
STARRETT S800PC 64131 - No. 800 Series , Square-Head Nail Sets and SET, SET of 5: One each of Nos. 800A/B/C/D/E in Case
STARRETT 67B 50317 - No.67 Series , Improved Scriber, Scriber with 2 Points
STARRETT 83B-6 50379 - No.83 Series , Dividers, 6" (150mm) with Quick-Spring Nut
STARRETT 155 50588 - No.155, 156M, 159M Series , Screw Pitch Gages, 60° Threads
STARRETT 161D 50597 - No.161 Series , Toolmakers' Parallel Clamps (Pairs), 2 3/4" (70mm) Capacity, 1 25/32" (45mm) Throat Depth
STARRETT CD604R-12 52666 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 12", 4R Grad, Adjustable Double Hook
STARRETT C335S-300 56048 - No. C330, C331, C334, C335S Series , Steel Rules with Millimeter and Millimeter/Inch Graduations, 300mm, No. 35 Grad, Semi-Flexible
STARRETT G-83006 83006 - 24" X 36" VINYL SURFACE PLATE COVER
STARRETT RSS-24 36130 - RAFTER/FRAMING SQUARES, 24" x 16" Steel, Engraved Scale Rafter Square (Professional)
STARRETT 414-2 51500 - No. 414 Series , Steel General Utility Rules, 24", 8ths/16ths Grad, Both Sides
STARRETT 380-12 51438 - No. 380 Series , Steel Straight Edges, Not Beveled
STARRETT PT22431 - Depth Attachment for 6-8" Calipers
STARRETT C251AZZ 55243 - No. 251 Series , Steel Beam Trammels and Attachments, Wood Case
STARRETT 969 68627 - No. 434 Series , Combination Sets with Forged and Hardened Steel Square and Center Heads, Cast Iron Protractor Heads, Reversible, Wood Case for Combo Sets - 12"
STARRETT 1610-4 53212 - No. 1610,1611 Series , Kleenscribe Layout Dye, 4 oz. (0.1 liter) Plastic Bottle
STARRETT 530-100 65946 - MEASURING TAPES - 530 SERIES, 100' L1 Grad Style
STARRETT SS.550.A1 - .550'' Square Steel Gage Block, Grade 0
STARRETT 92281 - .900'' Rectangular Gage Block, Grade 0
STARRETT 92284 - 1.000'' Rectangular Gage Block, Grade 0
STARRETT 237 51080 - No. 237, 237M , Rule Depth Gages, 0-6" Range, 32nds/64ths
STARRETT H11-1224 50071 - No.11 Series , Series Heads for Combination Squares and Sets, 12", 18" or 24" Square Head
STARRETT C635-300 52631 - No. 635,C635 Series , Steel Rules with Millimeter Graduations, 150-1000mm, Spring-Tempered, 300mm, No. 35 Grad
STARRETT SX40 63177 - CARPENTERS' FOLDING RULES WITH BRASS EXTENSION, 6' Regular- Outside
STARRETT 915 64166 - No.120, 120M Series , Dial Calipers, Leather Holster for 6" (150mm) Dial Calipers
STARRETT S565PC - Drive Pin Punch SET of (8): 565A/B/C/D/E/F/G/H in Round Red Plastic Box
STARRETT 172CT 50652 - Nos. 172, 173 Series , Thickness Gages, 8 Tapered Leaves, 1/2-1/4 x 6", inch reading, .002-.015" Range
STARRETT 827A 53062 - No. 827, 827M Series , Edge Finders, Single End, .375" Body Dia., .200" Contact Dia.
STARRETT 154F 50583 - No.154 Series , Adjustable Parallels and SETS, 5 1/16" (130mm) Length, 1 3/4 -2 1/4" (44-57mm) Range
STARRETT 79B-6 50367 - No.79 Series , "Yankee" Spring-Type Calipers (Outside), 6" (150mm) with Quick-Spring Nut
STARRETT C316R-12 51375 - No. C316R Series , Steel Rules, 12", 16R Grad, Full-Flexible
STARRETT C604R-6 52678 - RULE,CHROME,SPRING TEMPERED 6"
STARRETT 52837 667-1 - No. 667,667M Series , Thickness Gage or "Feeler Stock"
STARRETT 247D 51177 - No. 247, 247M Series , Micrometer Ball Attachments, .250" Diameter Anvils
STARRETT C635-150 52630 - No. 635,C635 Series , Steel Rules with Millimeter Graduations, 150-1000mm, Spring-Tempered, 150mm, No. 35 Grad
STARRETT C316R-6 51374 - No. C316R Series , Steel Rules, 6", 16R Grad, Full-Flexible
STARRETT 828A 53066 - No. 828 Series , Wiggler or Center Finder with Attachments, Pointed Shank, 3/8" (9.5mm) Ball Diam.
STARRETT CH34-25 65940 - TRU-LOK(r) TAPES WITH 3/4" (19mm) BLADES, 25' S1 Grad Style with Charcoal Case
STARRETT RS.800A1 - .8" Gage Block, Steel Grade O
STARRETT 91A 50419 - No.91 Series , Tap Wrenches, 6" (150mm) Length, 1/16-1/4" (1.6-6.4mm) Tap Size
STARRETT 93C 50429 - No.93 Series , T-Handle Tap Wrenches, 3 1/2" (88mm) Length, 1/4-1/2" (6.4-12.7mm) Tap Size
STARRETT 234A-7 - 7'' End Measuring Rod with spherical ends
STARRETT 18B 50121 - AUTOMATIC CENTER PUNCH
STARRETT 277-3 51309 - No. 274, 275, 277 Series , Toolmakers' Spring-Type Calipers and Dividers with Round Legs and Solid Nut, 3" (75mm) Divider
STARRETT S248PC 51186 - No. 248 Series , Drive Pin Punches and SETS, SET, 5 Punches, One each 248A/B/C/D/E in Vinyl Case
STARRETT 73B-6 50337 - No.73 Series , "Yankee" Spring-Type Calipers (Inside), 6" (150mm) with Quick-Spring Nut
STARRETT C12-4M8 65781 - TRU-LOK(r) TAPES WITH 1/2" (13mm) BLADES, 4M S8 Grad Style with Chrome Case
STARRETT C303R-6 51334 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 6", 3R Grad, Full-Flexible
STARRETT 919 55155 - No.20 Series , Master Precision Squares, Wood Case, 6" (was 20ZZ-6/55ZZ-6)
STARRETT K153 64147 - HAND HACKSAW FRAMES, Hacksaw Frame, 12" (300mm) Heavy-Duty, High Tension (Closed Grip)
STARRETT RS.600.A1 - .600'' Rectangular Steel Gage Block, Grade 0
STARRETT 565A - Drive Pin Punch 4" (100mm), 1/16" (1.5mm) Diameter
STARRETT C1-25 65366 - TRU-LOK(r) TAPES WITH 1" (25mm) BLADES, 25' S1 Grad Style with Chrome Case
STARRETT SS.130.A1 - .130'' Square Steel Gage Block, Grade 0
STARRETT C604R-12 52679 - RULE,CHROME,SPRING TEMPERED 12"
STARRETT 532-100 64238 - 532 SERIES MEASURING TAPES, FIBERGLASS LINE WITH HOOK, 100'
STARRETT RS.060A1 - .060'' Rectangular Steel Gage Block, Grade 0
STARRETT SO60F 63180 - CARPENTERS' FOLDING RULES, 6' Flat- Inside
STARRETT 27-6 50193 - Nos.26, 27 Series , Improved Firm-Joint Calipers, 6" (150mm), Inside
STARRETT 26-6 50186 - Nos.26, 27 Series , Improved Firm-Joint Calipers, 6" (150mm), Outside
STARRETT S117PC 50488 - No.117 Series , Center Punches and SET, with Round Shanks, SET, Nos. 117AA, A, B, C, D in Plastic Case
STARRETT SM412ME 63173 - MEASURE STIX, 1/2" x 3.65M/ 12' S12 Grad Style
STARRETT 667-1 1/2 52838 - No. 667,667M Series , Thickness Gage or "Feeler Stock" and ASSORTMENTS, .0015", 12" Length
STARRETT 667-2 52839 - No. 667,667M Series , Thickness Gage or "Feeler Stock" and ASSORTMENTS, .002", 12" Length
STARRETT 18AA 50119 - AUTOMATIC CENTER PUNCH
STARRETT 93B 50428 - No.93 Series , T-Handle Tap Wrenches, 2 1/2" (63mm) Length, 7/32-7/16" (5.5-11mm) Tap Size
STARRETT 136 50572 - No.136 , Cross Test Level, 2 3/4" x 2 3/4" (70 x 70mm)
STARRETT 1634 55434 - No. 1634 , Wide Rule Case, Rule Case for 3/4"/19mm Wide Rules
STARRETT H11-4 50069 - No.11 Series , Series Heads for Combination Squares and Sets, 4" Square Head
STARRETT RS.400A1 - .4" Gage Block, Steel Grade O
STARRETT 946 - Finished Wood Case for 0-12" Calipers
STARRETT RSA-24 36131 - RAFTER/FRAMING SQUARES, 24" x 16" Aluminum, Engraved Scale Rafter Square (Professional)
STARRETT 414-1 51499 - No. 414 Series , Steel General Utility Rules, 12", 8ths/16ths Grad, Both Sides
STARRETT 916 55152 - No.20 Series , Master Precision Squares, Wood Case, 1 1/2" (was 20ZZ-1 1/2 / 55ZZ 1 1/2)
STARRETT 818 53048 - No. 818, 819 Series , Automatic Center Punches, with Adjustable Stroke
STARRETT S816PC 57078 - No. 816 Series , Prick Punches and SET, SET: One each of Nos. 816A/B/D and Nos. 117AA/B
STARRETT G-83002 83002 - 12" X 18" VINYL SURFACE PLATE COVER
STARRETT 58S 56613 - Nos.57S, 58S Series , Universal Snugs for Surface Gages
STARRETT 953 55224 - No. 216, 216M Series , Digital Micrometers, Case, 5"/125mm (was 436ZZ-5/216ZZ-5/226ZZ-5/486ZZ-4)
STARRETT 93A 50427 - No.93 Series , T-Handle Tap Wrenches, 2" (50mm) Length, 1/16-3/16" (1.6-4.7mm) Tap Size
STARRETT 579B 52611 - No. 579 Series , Telescoping Gages and SETS, Self-Centering with Two Telescoping Arms, 1/2-3/4" (13-19mm) Range, 2 3/8" (60mm) Handle
STARRETT 1734 57123 - No. 1716 to 1734 Series , VHS Video Tapes, "Tools/Rules for Precision Measuring"
STARRETT 140-3-600 67428 - EXPERT LEVELS, 24" (60 cm), 3 Vials (2 plumb, 1 level)
STARRETT AR2-36 36104 - ALUMINUM RULES/ YARDSTICKS, 36", .075 thick, 1/8" & 1/16" Grads, Ruled Two Sides
STARRETT AC1-8M6 65671 - TAPE, CONTROLOK
STARRETT 92183 - .1'' Rectangular Gage Block (long length), Grade 0
STARRETT RS.250.A1 - .250'' Rectangular Steel Gage Block, Grade 0
STARRETT RS.200.A1 - .200'' Rectangular Steel Gage Block, Grade 0
STARRETT SK1 63135 - KEY CADDY, Regular Belt Clip
STARRETT AMSE-2000 36100 - FLAT ALUMINUM STRAIGHT EDGE RULES, 2000 mm, .125" (3.175 mm) thick
STARRETT Y510-100 65991 - MEASURING TAPES- 510 SERIES, 100' L1 Grad Style with Yellow Case
STARRETT Y510-30CME 66211 - MEASURING TAPES- 510 SERIES, 30M/ 100' L6 Grad Style with Yellow Case
STARRETT C623R-6 56661 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 6", 10R Grad with Letter and Number Drill Sizes
STARRETT 827B 53063 - No. 827, 827M Series , Edge Finders, Double End, .500" Body Dia., .200" Contact Dia. and Pointed Contact
STARRETT 554 52547 - No. 554 , Eyeglass Screwdriver, 2 1/2" (63mm) Overall Length
STARRETT 92242 - .144'' Rectangular Gage Block, Grade 0
STARRETT 92243 - .145'' Rectangular Gage Block, Grade 0
STARRETT 50706 - Hole Attachment for Dial Test Indicators
STARRETT 135B 50571 - No.135 Series , Pocket Levels, Satin Nickel-Plated Finish
STARRETT 1715 53220 - No. 1702, 1715 , Educational Charts, Educational Charts (Set of 18), 3-Ring Notebook Size
STARRETT 70AX 50327 - No.70 Series , Pocket Scribers, Scriber with 2 3/8" Tungsten Carbide Point
STARRETT C12-12 65418 - TRU-LOK(r) TAPES WITH 1/2" (13mm) BLADES, 12' S1 Grad Style with Chrome Case
STARRETT 1612 55433 - No. 1612 , Rule Case, Rule Case for 1/2"/12.7mm Wide Rules
STARRETT 67666 - Ultragel Coupling Gel, 4 oz. Bottle, for use on No. 3812 Ultrasonic Thickness Gage
STARRETT 1702 56172 - No. 1702, 1715 , Educational Charts, Educational Charts (Set of 18), Wall Size
STARRETT ASE-72 36094 - ALUMINUM STRAIGHT EDGE RULES, 72", .125" thick, 1/8" & 1/16" Grads
STARRETT C635E-150 55968 - No. 635,C635 Series , Steel Rules with Millimeter Graduations, 150-1000mm, Spring-Tempered, 150mm, No. 35 Grad, End Graduations
STARRETT 827MB 66452 - No. 827, 827M Series , Edge Finders, Double End, 10mm Body Dia., 6mm Contact Dia. and Pointed Contact
STARRETT 1701-ST 53219 - No. 1701 Training Kit, Training Aid Kit
STARRETT XY1-25 67670 - ProSite(r) TAPE MEASURES, 25' S1 Grad, with Yellow Case
STARRETT 1309R-6 53204 - No. 1309R-6, Stainless Steel Rule, 6" Rule, 9R Grad, Stainless Steel
STARRETT 240B 51137 - No. 240 Series , Pin Vises with Tapered Collets and SET, .025-.075" (0.64-1.9mm) Range
STARRETT M-9 36070 - TORPEDO LEVELS & LINE LEVELS, 9" (23 cm), 3 Vials (1 plumb, 1 level, 1 45°), Magnetic Base, Level, Pitch/Slope Vial
STARRETT C607R-6 52688 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 6", 7R Grad
STARRETT C334-150 56262 - No. C330, C331, C334, C335S Series , Steel Rules with Millimeter and Millimeter/Inch Graduations, 150mm (5 3/4"), No. 34 Grad, Full-Flexible
STARRETT C604RE-6 52660 - RULE,CHROME W/END GRADUATION 6"
STARRETT C304SRE-6 51343 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 6", 4R Grad, Semi-Flexible, End Grads
STARRETT C636EM-6 57064 - No. C636 Series , Steel Rules with Millimeter and Inch Graduations, Spring-Tempered, 6" (150mm), No. 36 Grad
STARRETT 827MA 56041 - No. 827, 827M Series , Edge Finders, Single End, 10mm Body Dia., 6mm Contact Dia.
STARRETT CH34-12 66168 - TRU-LOK(r) TAPES WITH 3/4" (19mm) BLADES, 12' S1 Grad Style with Charcoal Case
STARRETT 247MD 56691 - No. 247, 247M Series , Micrometer Ball Attachments, 6.35mm Diameter Anvils
STARRETT 174 50658 - No.174 , Tap Wrench, 0-14 Tap Size
STARRETT C637-150 56049 - No. C637 Series , Steel Rules, Millimeter Graduations, Spring-Tempered, 150mm, No. 37 Grad
STARRETT ASE-60 36093 - ALUMINUM STRAIGHT EDGE RULES, 60", .125" thick, 1/8" & 1/16" Grads
STARRETT 234B-2 - 2" End Measuring Rod with Insulating Handle
STARRETT PT22428 - Swivel Post Snug with Dovetail Indicator Clamp
STARRETT A-9 36069 - TORPEDO LEVELS & LINE LEVELS, 9" (23 cm), 3 Vials (1 plumb, 1 level, 1 45°), Grooved Base
STARRETT AM-2 36080 - ANGLE METER, 5" x 5" Magnetic Base and Back
STARRETT XY1-16 67671 - ProSite(r) TAPE MEASURES, 16' S1 Grad, with Yellow Case
STARRETT Y510-50 65988 - MEASURING TAPES- 510 SERIES, 50' L1 Grad Style with Yellow Case
STARRETT 723ZZ-6 - Deluxe Padded Case for 0-6" Calipers
STARRETT 914 64165 - Cases , Leather Holster for 1" (25mm) Micrometers
STARRETT C309R-6 51357 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 6", 9R Grad, Full-Flexible
STARRETT C304R-6 66008 - No. C303R, C306R, C309R, C310R Series , Steel Rules with Inch Graduations, 6", 4R Grad, Full-Flexible
STARRETT C330-150 51329 - No. C330, C331, C334, C335S Series , Steel Rules with Millimeter and Millimeter/Inch Graduations, 150mm (5 3/4"), No. 30 Grad, Full-Flexible
STARRETT C604R-4 56467 - No. C601, 604, C606, C607, 610, 611, C616, C622, C623 Series , Steel Rules,Inch Graduations, Spring-Tempered, 4", 4R Grad
STARRETT VK92046 36145 - LEVEL ACCESSORIES - REPLACEMENT VIAL KITS, Level (STE Series Levels)
STARRETT 166B 50610 - No.166 Series , Pin Vises and SETS, with PVC Octagonal Handles, .030-.062" (0.8-1.6mm) Range
STARRETT F190A 64623 - No. 190 Series , "Little Giant" Jack Screws and SETS, 2 1/4-3 3/8" (57-85mm) Range, Jack only with Fine-Adjusting Screw
STARRETT C1-8M6 65743 - TRU-LOK(r) TAPES WITH 1" (25mm) BLADES, 8M S6 Grad Style with Chrome Case
STARRETT C1-8ME12 65748 - TRU-LOK(r) TAPES WITH 1" (25mm) BLADES, 8M/ 26' S12 Grad Style with Chrome Case
STARRETT C1-8ME9 65746 - TRU-LOK(r) TAPES WITH 1" (25mm) BLADES, 8M/ 26' S9 Grad Style with Chrome Case
STARRETT 657S - Snug (Sleeve) for Magnetic Base Indicator Holder
STARRETT 1611 55896 - No. 1610,1611 Series , Kleenscribe Layout Dye, 11 1/2
STARRETT AC12-4ME12 65724 - TAPE, CONTROLOK
STARRETT RS-24 36128 - RAFTER/FRAMING SQUARES, 24" x 16" Steel, Printed Scale Rafter Square
STARRETT FS-24 36129 - RAFTER/FRAMING SQUARES, 24" x 16" Steel, Engraved Scale Framing Square (Professional)
STARRETT ASE-48 36092 - ALUMINUM STRAIGHT EDGE RULES, 48", .125" thick, 1/8" & 1/16" Grads
STARRETT 72400 - Indicator Holding Rod
STARRETT TG-36 68853 - TOUGH GRIP(tm) NON-SLIP TOOL PAD, Tool Pad 24 x 36"
STARRETT PT1872 - Snug Complete - 1/4" and 3/8" Holes
STARRETT PT45065 45060 - No. 4000 Series , Pin Gage Handles, Handle, Pin Gage (.011 - .060)
STARRETT PT45250 45250 - No. 4000 Series , Pin Gage Handles, Handle, Pin Gage (.061 - .250)
STARRETT 1700 53218 - No. 1700 , Student Machinists' Book, The Starrett Book for Student Machinists
STARRETT TS-8 12152 - CARPENTERS' TRY SQUARE (PROFESSIONAL), 8" (225 mm) blade with 1/8" & 1mm Grads, w/wood handle
STARRETT C34-5M6 65755 - TRU-LOK(r) TAPES WITH 3/4" (19mm) BLADES, 5M S6 Grad Style with Chrome Case
STARRETT C34-5ME9 65758 - TRU-LOK(r) TAPES WITH 3/4" (19mm) BLADES, 5M/ 16' S9 Grad Style with Chrome Case
STARRETT Y12-12S 12157 - SHRINK TAPE, 1/2" x 12' S4 Grad Style with Yellow Case
STARRETT SCL100 63139 - CHALK LINES, 30M/ 100' with Die-Cast Case
STARRETT 216ZZ-2 56171 - No. 216, 216M Series , Digital Micrometers, Steel/Vinyl 2" Case
STARRETT 162A 50599 - No.162 Series , Pin Vises and SETS, 0-.040" (0-1mm) Range
STARRETT 551A 67195 - No. 551 Series , Precision Screwdrivers and Set, .060" (1.5mm) Blade Width
STARRETT SCL50 63138 - CHALK LINES, 15M/ 50' with Die-Cast Case
STARRETT CH12-10DME 65792 - DECIMAL ENGLISH / METRIC TAPE, 1/2" x 10' S5 Grad Style with Charcoal Case
STARRETT 913 55400 - No. 226, 226M Series , Outside Micrometers and SETS, Steel/Vinyl Case for 2" (50mm) Micrometers (Nos. 226, 436, 486-1")
STARRETT 553A 52543 - No. 553 Series , Pocket Screwdrivers, With 1 7/8" (48mm) Blade, Overal Length is 4 1/4" (110mm)
STARRETT KS05R 61784 - KNIFE BLADE DISPENSER PACKS, Contains 10 Replacements for small break-away knives
STARRETT C12-4ME12 65784 - TRU-LOK(r) TAPES WITH 1/2" (13mm) BLADES, 4M/ 12' S12 Grad Style with Chrome Case
STARRETT C12-4ME9 65782 - TRU-LOK(r) TAPES WITH 1/2" (13mm) BLADES, 4M/ 12' S9 Grad Style with Chrome Case
STARRETT PT42001 42001 - 1.000 PIN GAGE ( PLUS )
STARRETT PT42125 42125 - 0.1250 PIN GAGE ( PLUS )
STARRETT PT42100 42100 - 0.1000 PIN GAGE ( PLUS )
STARRETT 264B 51279 - No. 264 Series , Center Punches and SET, with Square Shank, 3 1/2" (88mm) Length
STARRETT 248A 51181 - No. 248 Series , Drive Pin Punches and SETS, 8" (200mm) Length, 1/8" (3mm) Diameter
STARRETT 248B 51182 - No. 248 Series , Drive Pin Punches and SETS, 8" (200mm) Length, 3/16" (5mm) Diameter
STARRETT PE-2 36076 - COLORED LINE/POCKET LEVELS, 3" (7.5 cm), 1 Level, Red
STARRETT SACLY100 64173 - REEL-FAST(r) CHALK AND PLUMB LINES, 30M/ 100' with Yellow Case
STARRETT PT99342 - Micrometer Depth Gage, 1-2" Rod for Nos. 443, 445
STARRETT PT99331 - Micrometer Depth Gage
STARRETT 167-015 63435 - No.167 Series , Individual Radius Gages Specifications - Decimal/Inch, .015" Radius Gage
STARRETT 124H 50556 - No.124, 124M Series , Solid-Rod Inside Micrometers, Handle for Nos. 124A/124B/124D and 124MA/124MB/124MD
STARRETT S154LZZ 55195 - No.154 Series , Adjustable Parallels and SETS, Plastic Case only for Set of 6 Parallels
STARRETT 70B 50324 - No.70 Series , Pocket Scribers, Scriber with 2 7/8" (72mm) Long Point
STARRETT AY12-12 65927 - AUTOMATIC CONTROLOK(r) TAPES WITH 1/2" (13mm) BLADES, 12' S1 Grad Style with Yellow Case
STARRETT PT06677K - Magnetic Contact Point, 2" Long, Rounded End
STARRETT 657Y - Indicator Attachment for 657 Series Test Indicators and Holders
STARRETT 70380 - Point only for Nos. 18AA and 18A
STARRETT S04Y 68832 - BREAK-AWAY BLADE UTILITY KNIVES, Small Yellow
STARRETT Y14-10L 12159 - LOCKING THIN TAPES, 10' S3A Grad Style with Yellow Case
STARRETT CH12-4ME12 65944 - TRU-LOK(r) TAPES WITH 1/2" (13mm) BLADES, 4M/ 12' S12 Grad Style with Charcoal Case
STARRETT 167-280 63454 - No.167 Series , Individual Radius Gages Specifications - Decimal/Inch, .280" Radius Gage
STARRETT 167-1/16 50624 - No.167 Series , Individual Radius Gages Specifications - Inch, 1/16" Radius Gage
STARRETT 565E - Drive Pin Punch 4" (100mm), 3/16" (5mm) Diameter
STARRETT 247D - Micrometer Ball Attachment
STARRETT 921 55213 - No. 223, 223M Series , Paper Gage Micrometers, Steel/Vinyl Case (was 223ZZ/232ZZ/576ZZ)
STARRETT 117AA 50482 - No.117 Series , Center Punches and SET, with Round Shanks, 3" (75mm) Length, 1/16" (1.5mm) Point Diameter
STARRETT ASE-36 36091 - ALUMINUM STRAIGHT EDGE RULES, 36", .081" thick, 1/8" & 1/16" Grads
STARRETT PY12-12 12173 - 1/2" (13mm) PUSH-PULL POCKET TAPES, 12' S1 Grad Style with Yellow Case
STARRETT S014 67989 - PRESSURE POINT(tm) UTILITY KNIFE- Power where you need it, Yellow Die-Cast Case with Black Over-Mold
STARRETT 423-1 70638 - No. 423 Series , Special Steel Rule, SET, and Accessories, 1" Rule only (PT05559)
STARRETT 555B - Jewelers' Screwdriver .055" (1.4mm) Blade Width
STARRETT 555E - Jewelers' Screwdriver .100" (2.5mm) Blade Width
STARRETT VK92045 36144 - LEVEL ACCESSORIES - REPLACEMENT VIAL KITS, Plumb (STE Series Levels)
STARRETT PT42500 42500 - 0.5000 PIN GAGE ( PLUS )
STARRETT PT42570 42570 - 0.5700 PIN GAGE ( PLUS )
STARRETT PT42250 42250 - 0.2500 PIN GAGE ( PLUS )
STARRETT PT42325 42325 - 0.3250 PIN GAGE ( PLUS )
STARRETT MY12-12 68932 - STARRETT TOUGH TAPES WITH YELLOW CASE AND BLACK OVER-MOLD, 1/2" X 12'
STARRETT 70500 - Measuring & Leveling Tool
STARRETT PT06677K - Magnetic Contact Point, 3" Long, Rounded End
STARRETT 910 55397 - No. 210, 210M Series , Screw Thread Comparator Micrometers, Steel/Vinyl Case for 1" (25mm) Micrometers
STARRETT 25SB 50154 - No.25 Series , AGD Indicator Accessories and SET, Split Bushing, 1/2" Length, .375" ID, .500" OD
STARRETT TG-24 68852 - TOUGH GRIP(tm) NON-SLIP TOOL PAD, Tool Pad 10 x 24"
STARRETT 71475 - Hold Rod .312" x 5" Long
STARRETT SUC8BLK 68766 - CHALK REFILLS- 8 OZ. (227G), Permanent Black
STARRETT C14-3Y 65802 - MINI-TAPE WITH CHAIN, 3' S1 Grad Style
STARRETT 423-1/2 70636 - No. 423 Series , Special Steel Rule, SET, and Accessories, 1/2" Rule only
STARRETT 423-1/4 70634 - No. 423 Series , Special Steel Rule, SET, and Accessories, 1/4" Rule only
STARRETT 423-3/4 70637 - No. 423 Series , Special Steel Rule, SET, and Accessories, 3/4" Rule only
STARRETT 423-3/8 70635 - No. 423 Series , Special Steel Rule, SET, and Accessories, 3/8" Rule only
STARRETT PT99492 - Two 3-Volt Batteries for 795/796 Micrometers
STARRETT 1025ZZ-6 55270 - Vinyl Case for 6" Caliper
STARRETT 970 68838 - Cases , Holster for 505A-12
STARRETT 264A 51278 - No. 264 Series , Center Punches and SET, with Square Shank, 3" (75mm) Length
STARRETT 264E 51282 - No. 264 Series , Center Punches and SET, with Square Shank, 4 1/4" (108mm) Length
STARRETT 816D 53046 - No. 816 Series , Prick Punches and SET, 4" (100mm) Length, 5/32" (4mm) Dia. Point
STARRETT 70827 - Magnetic Contact Point, 1 1/2" Long Rounded End
STARRETT PT06677K - Magnetic Contact Point, 1" Long, Rounded End
STARRETT 52764 - Rod for 657 Series
STARRETT 167M-6 1/2 55807 - No.167M Series , Individual Radius Gages Specifications - Millimeters, 6.5mm Radius Gage
STARRETT 167-1/4 50636 - No.167 Series , Individual Radius Gages Specifications - Inch, 1/4" Radius Gage
STARRETT 565B - Drive Pin Punch 4" (100mm), 3/32" (2.5mm) Diameter
STARRETT 565C - Drive Pin Punch 4" (100mm), 1/8" (3mm) Diameter
STARRETT 816A 53043 - No. 816 Series , Prick Punches and SET, 4" (100mm) Length, 5/64" (2mm) Dia. Point
STARRETT 816B 53044 - No. 816 Series , Prick Punches and SET, 4" (100mm) Length, 1/8" (3mm) Dia. Point
STARRETT 117A 50483 - No.117 Series , Center Punches and SET, with Round Shanks, 4" (100mm) Length, 5/64" (2mm) Point Diameter
STARRETT 117B 50484 - No.117 Series , Center Punches and SET, with Round Shanks, 4" (100mm) Length, 3/32" (2.5mm) Point Diameter
STARRETT 117C 50485 - No.117 Series , Center Punches and SET, with Round Shanks, 4" (100mm) Length, 1/8" (3mm) Point Diameter
STARRETT 667-22 52860 - No. 667,667M Series , Thickness Gage or "Feeler Stock" and ASSORTMENTS, .022", 12" Length
STARRETT 667-10 52848 - No. 667,667M Series , Thickness Gage or "Feeler Stock" and ASSORTMENTS, .010", 12" Length
STARRETT 667-5 52843 - No. 667,667M Series , Thickness Gage or "Feeler Stock" and ASSORTMENTS, .005", 12" Length
STARRETT 667M-6 52872 - No. 667,667M Series , Thickness Gage or "Feeler Stock" and ASSORTMENTS, .06mm, 30cm Length
STARRETT 667M-8 52873 - No. 667,667M Series , Thickness Gage or "Feeler Stock" and ASSORTMENTS, .08mm, 30cm Length
STARRETT 667-20 52858 - No. 667,667M Series , Thickness Gage or "Feeler Stock" and ASSORTMENTS, .020", 12" Length
STARRETT 667M-5 52871 - No. 667,667M Series , Thickness Gage or "Feeler Stock" and ASSORTMENTS, .05mm, 30cm Length
STARRETT PEG-2 36266 - COLORED LINE/POCKET LEVELS, 3" (7.5 cm), 1 Level, Lime Green
STARRETT S012 68830 - BREAK-AWAY BLADE UTILITY KNIVES, Large Yellow
STARRETT 1025ZZ-5 55269 - Vinyl Case for 5" (130mm) Caliper

Have a representative contact me - you will be contacted by telephone and email.

Note: Consult with Micro Precision Calibration field service coordinators to verify your onsite calibration needs are within our accredited scope.

SERVICES

ABOUT US

ACCREDITATIONS
TEST EQUIPMENT
OTHERS

CALIBRATION CAPABILITIES

DIVISION

Micro Precision Calibration Inc. is an ISO/IEC 17025:2005 Accredited Laboratories that perform Calibration traceable to International Standards. We are ISO 9001:2008 Registered and ANSI/NCSL Z-540.1-1994 Compliant. This allows Micro Precision Calibration Service to provide state-of-the-art test equipment calibration services that precisely measure scale, flow, force, torque, weight, pressure, temperature, optical and calibrate almost any mechanical, electronic, or dimensional instrument.

Headquarter
22835 Industrial Place Grass Valley, CA USA 95949
(530) 268-1860 phone
(530) 268-1203 fax
gv-contact@microprecision.com